UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Nottinghamshire

Fire door hold-open devices in Beeston

Whether your building in Beeston has a modern addressable alarm or a simple conventional system, there is usually a hold-open option that works with it. We compare wired, radio and acoustic devices on a free survey and set out the choice in a fixed quote.

Town
Beeston
Area
Nottinghamshire
Postcodes
NG9
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Beeston and nearby

If your building is in Beeston, or anywhere in the NG9 postcode district, we can arrange fire door hold-open devices. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Care homes in and around Beeston often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Long Eaton (2.6 miles), Nottingham (3.8 miles), West Bridgford (3.9 miles), Ilkeston (5.4 miles), Carlton (6.5 miles), Eastwood (6.7 miles).

What to think about for fire door hold-open devices in Beeston

  • Schools and colleges in Beeston may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
  • Hard-wired magnets need a power supply near each door. In buildings in Beeston where that is awkward, battery units avoid running new cables along finished corridors.
  • If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
  • Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.

Fire door hold-open devices in Beeston: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Beeston and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Tell us about the fire doors that cause problems in Beeston. We will survey them free of charge and explain which hold-open options your alarm can support.

Fire door hold-open devices in Beeston: questions

Which doors in my building in Beeston can be held open?

That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.

How much should I budget for fire door hold-open devices in Beeston?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Beeston confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will you test the hold-open devices before leaving our site in Beeston?

Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.

Do care homes in Beeston use free-swing closers?

Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.

Do I need permission from a landlord or the council before work in Beeston?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

What power supply is needed for fire door hold-open devices in Beeston?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Who is responsible for automatic doors on escape routes in Beeston?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Fire door hold-open devices in Beeston

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.