Coverage across Greater Manchester
Booking automating an existing door in Greater Manchester does not depend on being close to a particular town. Engineers working under our management travel throughout the area, and nothing goes ahead until the price has been agreed in writing. Below are the towns we list here, 44 at present, each linking to a page with nearby places and guide prices.
Towns listed in Greater Manchester: Manchester, Oldham, Wigan, Bolton, Stockport, Salford, Rochdale, Sale, Bury, Altrincham, Middleton, Ashton-under-Lyne, Leigh, Stretford, Urmston, Chadderton, Eccles, Tyldesley, Hyde, Walkden, Prestwich, Radcliffe, Cheadle Hulme, Heywood, Denton, Stalybridge, Ashton-in-Makerfield, Westhoughton, Farnworth, Hindley, Golborne, Droylsden, Whitefield, Swinton, Royton, Atherton, Dukinfield, Failsworth, Hazel Grove, Irlam, Horwich, Bramhall, Ramsbottom, Bredbury.
What to think about for automating an existing door in Greater Manchester
- Doors facing the weather in exposed parts of Greater Manchester are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.
- Schools and community buildings in Greater Manchester may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
- Shop fronts on high streets in Greater Manchester often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
- Homes in Greater Manchester with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
Automating an existing door in Greater Manchester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is automating an existing door for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Greater Manchester.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Want to automate an existing door in Greater Manchester? Start with a free survey, and decide once you have the fixed, itemised quote in front of you.
Automating an existing door in Greater Manchester: questions
How long will our door in Greater Manchester be out of use?
Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.
How are prices worked out for automating an existing door in Greater Manchester?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Greater Manchester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will automating our door in Greater Manchester need planning permission?
Fitting an operator to an existing door does not usually need planning permission, but a listed building may need consent for fixings or new switches on the outside. In a conservation area, mounting the operator inside often avoids any change to the street view. Check with the planning authority if in doubt.
Can you automate a fire door at our premises in Greater Manchester?
Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.
What power supply is needed for automating an existing door in Greater Manchester?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What happens to the old door when a new one is fitted in Greater Manchester?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Can a home in Greater Manchester get help paying for a door opener?
Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.