Covering Hazel Grove and nearby
Addresses anywhere in the SK7 postcode district can book automating an existing door through us. The engineer who attends works under our management and travels to the site. There is no branch in Hazel Grove, so the price, the booking and the paperwork all come from one place.
Small offices, community centres and village halls around Hazel Grove tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for automating an existing door (straight-line distance): Bredbury (2.3 miles), Stockport (2.5 miles), Bramhall (2.7 miles), Cheadle Hulme (3.1 miles), Hyde (4.9 miles), New Mills (5.0 miles).
What to think about for automating an existing door in Hazel Grove
- Schools and community buildings in Hazel Grove may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
- Older buildings in Hazel Grove often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- Listed buildings and conservation areas in Hazel Grove may need consent for an operator on an original door. Mounting it on the inside face usually keeps the street view the same.
- Glass in a door that will be automated should be safety glass. Older doors in Hazel Grove may have panes that need replacing before the work goes ahead.
- Doors facing the weather in exposed parts of Hazel Grove are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.
Automating an existing door in Hazel Grove: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Hazel Grove and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automating an existing door separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Get a fixed price for automating a door in Hazel Grove. The quote covers the operator, safety devices, controls and any work the door needs first.
Automating an existing door in Hazel Grove: questions
Can you automate a fire door at our premises in Hazel Grove?
Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.
What do you charge for automating an existing door in Hazel Grove?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Hazel Grove confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if our door in Hazel Grove turns out to need replacing?
Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.
Can you look after the door in Hazel Grove once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
What happens to the old door when a new one is fitted in Hazel Grove?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What happens once the installation in Hazel Grove is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Hazel Grove?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.