Coverage across Greater Manchester
Booking accessible door operators in Greater Manchester does not depend on being close to a particular town. Engineers working under our management travel throughout the area, and nothing goes ahead until the price has been agreed in writing. Below are the towns we list here, 44 at present, each linking to a page with nearby places and guide prices.
Towns listed in Greater Manchester: Manchester, Oldham, Wigan, Bolton, Stockport, Salford, Rochdale, Sale, Bury, Altrincham, Middleton, Ashton-under-Lyne, Leigh, Stretford, Urmston, Chadderton, Eccles, Tyldesley, Hyde, Walkden, Prestwich, Radcliffe, Cheadle Hulme, Heywood, Denton, Stalybridge, Ashton-in-Makerfield, Westhoughton, Farnworth, Hindley, Golborne, Droylsden, Whitefield, Swinton, Royton, Atherton, Dukinfield, Failsworth, Hazel Grove, Irlam, Horwich, Bramhall, Ramsbottom, Bredbury.
What to think about for accessible door operators in Greater Manchester
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
- Power is usually taken from a fused spur near the head of the door. If there is no supply close by, allow for an electrician to run one, ideally hidden in trunking or the wall.
- Check how heavy the door is to push now. If the closer is set very strong for fire or wind reasons, the operator has to be chosen to suit, and the closer may need adjusting.
- Offices and shared buildings in Greater Manchester often have doors used by both staff and visitors. Power assist for everyday use, with a push pad for those who need full opening, keeps the door easy for everyone.
- If the door is a fire door, find its rating or records before the survey. Fixings and cabling must respect the rating, and the operator must release the door on the fire alarm.
Accessible door operators in Greater Manchester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is accessible door operators for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Greater Manchester.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Get the door at your premises in Greater Manchester opening at the press of a pad. Start with a free survey and a fixed written quote.
Accessible door operators in Greater Manchester: questions
Do you fit operators to accessible toilets in Greater Manchester?
Yes. An accessible toilet usually needs a low-energy operator, push pads inside and out, a lock button that stops the door opening from outside while in use, and an emergency release for staff. We price the full kit, test it with your staff and leave the settings in writing.
What will accessible door operators in Greater Manchester cost?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Greater Manchester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if the door in Greater Manchester is too heavy for a low-energy operator?
Some large or exposed doors need a full-energy operator with safety sensors, or a lighter replacement door, to work reliably. The survey will tell you which, and the quote explains why. Where it will work, we offer the low-energy option first because it is simpler to live with.
Can you fit operators to several doors across our sites in Greater Manchester?
Yes. We can survey several doors or buildings in one visit where they are close together and quote each door separately, so you can phase the work if budgets need it. Controls and push pads can be kept the same across sites for consistency.
Can automatic doors be fitted to a listed building in Greater Manchester?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
How are payments structured for work in Greater Manchester?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Who is responsible for automatic doors on escape routes in Greater Manchester?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.