UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · County Antrim

Automating an existing door in Lisburn

Shops, offices and schools in Lisburn often have aluminium or timber doors that are fine apart from the effort needed to open them. A retrofit operator removes that effort and leaves the frontage looking the same.

Town
Lisburn
Area
County Antrim
Postcodes
BT27, BT28
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Lisburn and nearby

Engineers working under our management travel to addresses across the BT27 and BT28 postcode districts for automating an existing door. There is no depot or showroom in Lisburn; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Health centres, GP surgeries and clinics around Lisburn need doors that open gently and stay open long enough for patients using walking aids or wheelchairs. Low-energy operators, push pads and careful sensor set-up matter more here than sheer speed.

Nearby towns we also list for automating an existing door (straight-line distance): Belfast (6.7 miles), Dundonald (10.6 miles), Newtownabbey (10.7 miles), Holywood (11.6 miles), Comber (11.8 miles), Lurgan (12.6 miles).

What to think about for automating an existing door in Lisburn

  • Older buildings in Lisburn often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
  • Glass in a door that will be automated should be safety glass. Older doors in Lisburn may have panes that need replacing before the work goes ahead.
  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
  • Homes in Lisburn with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
  • Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.

Automating an existing door in Lisburn: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in Northern Ireland

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.

In Northern Ireland, disability access duties come from the Disability Discrimination Act 1995, because the Equality Act 2010 does not apply there. Service providers and employers are expected to make reasonable adjustments, and an automatic door is a common one at entrances. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Lisburn.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Ask us to look at the doors at your premises in Lisburn. If a retrofit makes sense, you get a fixed quote, and if replacement is better, we explain why.

Automating an existing door in Lisburn: questions

Can you automate a front door at a house in Lisburn?

Yes. Front doors at home are often automated for wheelchair users and people with limited grip, usually with an electric keep or lock so the door locks itself as it closes. Home prices are quoted including VAT, and the survey is free.

Can you give me a price for automating an existing door in Lisburn?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Lisburn confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you look after the door in Lisburn once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

Do you provide the paperwork for an automated door in Lisburn?

Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.

How do you make sure the door works for disabled visitors in Lisburn?

We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.

What does the free site survey in Lisburn involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automating an existing door, with drawings where the door type needs them.

Can a home in Lisburn get help paying for a door opener?

Possibly. In Northern Ireland Disabled Facilities Grants of up to £25,000 are run through the Housing Executive and are normally based on an occupational therapist’s recommendation, so raise a powered door opener at that assessment.

Next step

Automating an existing door in Lisburn

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.