Covering Lisburn and nearby
Coverage for touch-free and push-button activation runs across the BT27 and BT28 postcode districts and out into the surrounding parts of County Antrim. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Health centres, GP surgeries and clinics around Lisburn need doors that open gently and stay open long enough for patients using walking aids or wheelchairs. Low-energy operators, push pads and careful sensor set-up matter more here than sheer speed.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Belfast (6.7 miles), Dundonald (10.6 miles), Newtownabbey (10.7 miles), Holywood (11.6 miles), Comber (11.8 miles), Lurgan (12.6 miles).
What to think about for touch-free and push-button activation in Lisburn
- Homes in Lisburn often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Clinics and surgeries in Lisburn often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
Touch-free and push-button activation in Lisburn: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in Northern Ireland
The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access to buildings is in Technical Booklet R, and building control approval is needed for new entrances.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for touch-free and push-button activation and book a survey in Lisburn.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Ask for a fixed price on touch-free switches, push pads or fobs in Lisburn. The survey is free and nothing is fitted until you accept the quote.
Touch-free and push-button activation in Lisburn: questions
Our door in Lisburn keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
How are prices worked out for touch-free and push-button activation in Lisburn?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Lisburn confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can wave switches in Lisburn be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
Do you fit door controls for homes in Lisburn?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Lisburn. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
What power supply is needed for touch-free and push-button activation in Lisburn?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What happens to the old door when a new one is fitted in Lisburn?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Which marking should a new automatic door in Lisburn carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.