UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Curved automatic doors · Wiltshire

Curved automatic doors in Melksham

For an entrance in Melksham that needs to look special and work hard, a full-round curved door gives a striking glass cylinder that also acts as a draught lobby. Book a free survey and we will check the space, the canopy and the floor.

Town
Melksham
Area
Wiltshire
Postcodes
SN12
Guide price
From £14,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Melksham and nearby

Engineers working under our management travel to addresses across the SN12 postcode district for curved automatic doors. There is no depot or showroom in Melksham; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Care homes in and around Melksham often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.

Nearby towns we also list for curved automatic doors (straight-line distance): Trowbridge (4.8 miles), Chippenham (6.1 miles), Calne (7.4 miles), Bath (9.6 miles), Warminster (11.8 miles), Frome (12.7 miles).

What to think about for curved automatic doors in Melksham

  • Listed buildings and conservation areas in Melksham may need consent for a curved entrance. Drawings showing the radius, frame colour and canopy detail help the planning authority understand the proposal.
  • Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.
  • The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
  • Busy entrances with curved floor guides collect grit from the street. A good matwell and regular cleaning of the guide channels keep the leaves running smoothly around the arc.
  • If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.

Curved automatic doors in Melksham: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.

ItemGuide priceNotes
Half-round curved sliding entrancefrom £14,995installed, ex VAT; priced on survey
Full-round curved entrance or large radiusPriced on surveyglass and track are made to the radius
Battery backup for power-cut operation£395 – £695per door, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Melksham.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Send us photos of the frontage in Melksham and any drawings you have, and we will arrange a free survey for a curved automatic entrance.

Curved automatic doors in Melksham: questions

Do you install curved automatic doors in Melksham?

Yes. We arrange half-round, full-round and segmental curved doors for buildings in Melksham and across Wiltshire. The survey, installation and commissioning are carried out by specialist automatic door engineers working under our management, and we remain the contracting party from the first drawing to handover.

How much should I budget for curved automatic doors in Melksham?

Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Melksham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can a curved door in Melksham replace a revolving door?

In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.

How long does a curved door project in Melksham take?

Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.

How much disruption should we expect while the work is done in Melksham?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

What should I send before the survey in Melksham?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for curved automatic doors together more easily.

Who is responsible for automatic doors on escape routes in Melksham?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Curved automatic doors in Melksham

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.