UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Curved automatic doors · Gwynedd

Curved automatic doors in Caernarfon

We supply and install curved automatic doors for commercial buildings in Caernarfon and elsewhere in Wales. Each project starts with a measured survey and approved drawings, and finishes with the door commissioned, tested and explained to the people who will run it.

Town
Caernarfon
Area
Gwynedd
Postcodes
LL55
Guide price
From £14,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Caernarfon and nearby

From shops and surgeries to schools, care homes and private houses, any building in the LL55 postcode district can be covered for curved automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.

Independent businesses in Caernarfon often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for curved automatic doors (straight-line distance): Bangor (8.3 miles), Holyhead (18.8 miles), Llandudno (22.1 miles), Colwyn Bay (24.9 miles).

What to think about for curved automatic doors in Caernarfon

  • A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Gwynedd, think about how rainwater will leave the canopy without running down the glass into the threshold.
  • If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
  • The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
  • Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.
  • Consider a spare curved panel for busy entrances in Caernarfon. It costs more at the start, but a broken leaf can then be replaced without waiting for new glass to be bent.

Curved automatic doors in Caernarfon: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.

ItemGuide priceNotes
Half-round curved sliding entrancefrom £14,995installed, ex VAT; priced on survey
Full-round curved entrance or large radiusPriced on surveyglass and track are made to the radius
Battery backup for power-cut operation£395 – £695per door, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.

Standards and rules in Wales

Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Caernarfon.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Planning a landmark entrance in Caernarfon? Contact us early, so the survey, drawings and curved glass all fit your programme.

Curved automatic doors in Caernarfon: questions

Will we need planning permission for a curved entrance in Caernarfon?

Possibly. A curved door that changes the look of the frontage or projects beyond the building line may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We raise the question at survey and can supply drawings and product details for an application.

How much should I budget for curved automatic doors in Caernarfon?

Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Caernarfon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can a curved door in Caernarfon replace a revolving door?

In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.

How long does a curved door project in Caernarfon take?

Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.

Can installation in Caernarfon happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

What does the written quote for curved automatic doors in Caernarfon include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Do businesses in Caernarfon have to fit automatic doors?

There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.

Next step

Curved automatic doors in Caernarfon

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.