Covering Chelsea and nearby
We cover the whole of the SW3 and SW10 postcode districts, along with nearby towns in Greater London. You book each visit for curved automatic doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Mixed-use blocks in Chelsea, with shops or offices at ground level and flats above, often have communal entrances run by a managing agent. Doors there have to suit residents, deliveries and visitors, and approval from the freeholder or agent usually comes before work starts.
Nearby towns we also list for curved automatic doors (straight-line distance): Battersea (1.1 miles), Kensington (1.3 miles), Fulham (1.4 miles), Westminster (1.6 miles), Clapham (2.2 miles), Shepherd's Bush (2.5 miles).
What to think about for curved automatic doors in Chelsea
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- Hotel entrances in Chelsea see bursts of arrivals with luggage and coach parties. Choose a diameter and clear opening that let several people and cases pass together without waiting for a second cycle.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Greater London, think about how rainwater will leave the canopy without running down the glass into the threshold.
Curved automatic doors in Chelsea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Chelsea and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on curved automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Planning a landmark entrance in Chelsea? Contact us early, so the survey, drawings and curved glass all fit your programme.
Curved automatic doors in Chelsea: questions
Is the site survey for a curved door in Chelsea free?
Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.
What price range should I expect for curved automatic doors in Chelsea?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Chelsea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will we need planning permission for a curved entrance in Chelsea?
Possibly. A curved door that changes the look of the frontage or projects beyond the building line may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We raise the question at survey and can supply drawings and product details for an application.
Can a curved door in Chelsea replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
Can automatic doors be fitted to a listed building in Chelsea?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What happens once the installation in Chelsea is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do businesses in Chelsea have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.