UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Safety and compliance upgrades · West Midlands

Safety and compliance upgrades in Shirley

We carry out safety and compliance upgrades on automatic doors anywhere in England, Shirley included, working from your inspection report or ours. Specialist engineers working under our management fit, set up and test each upgrade with a test body.

Town
Shirley
Area
West Midlands
Postcodes
B90
Guide price
From £195 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Shirley and nearby

We cover the whole of the B90 postcode district, along with nearby towns in the West Midlands. You book each visit for safety and compliance upgrades directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.

Many buildings in Shirley are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.

Nearby towns we also list for safety and compliance upgrades (straight-line distance): Solihull (1.6 miles), Birmingham (5.9 miles), Smethwick (8.4 miles), Redditch (9.0 miles), Halesowen (10.0 miles), Oldbury (10.3 miles).

What to think about for safety and compliance upgrades in Shirley

  • Programme switches within reach of the public in Shirley should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
  • Doors serving care homes and hospitals in Shirley may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
  • Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
  • Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.
  • If your building in Shirley has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.

Safety and compliance upgrades in Shirley: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Side-screen protection or guardingfrom £295per door, ex VAT
Battery backup for power-cut operation£395 – £695per door, ex VAT
Programme switch with key£145 – £345fitted, ex VAT
Upgrade package for an older door£795 – £2,495typical, after an inspection, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

How it works

  1. Describe what you need. Whether the job is safety and compliance upgrades for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Shirley.
  2. Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
  3. Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
  4. Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.

Send us your inspection report for doors in Shirley, and we will arrange a free survey and quote each upgrade as a separate item.

Safety and compliance upgrades in Shirley: questions

Is it cheaper to upgrade or replace our old door in Shirley?

Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.

What is the guide price for safety and compliance upgrades in Shirley?

Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Shirley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you quote from our existing inspection report in Shirley?

Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.

How long do upgrades take at premises in Shirley?

Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.

Is there a warranty on safety and compliance upgrades?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

What happens to the old door when a new one is fitted in Shirley?

If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.

Do businesses in Shirley have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Safety and compliance upgrades in Shirley

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.