Covering Oldbury and nearby
Addresses anywhere in the B68 and B69 postcode districts can book safety and compliance upgrades through us. The engineer who attends works under our management and travels to the site. There is no branch in Oldbury, so the price, the booking and the paperwork all come from one place.
Small offices, community centres and village halls around Oldbury tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): West Bromwich (1.6 miles), Rowley Regis (1.6 miles), Smethwick (2.1 miles), Dudley (2.8 miles), Tipton (3.0 miles), Wednesbury (3.6 miles).
What to think about for safety and compliance upgrades in Oldbury
- Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
- Listed buildings and conservation areas in Oldbury may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
- Busy retail and public buildings in Oldbury may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
- Older shopfronts in Oldbury often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
Safety and compliance upgrades in Oldbury: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for safety and compliance upgrades in Oldbury, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Close off the actions on your automatic door risk assessment in Oldbury. Ask for a fixed, itemised quote for the upgrades it recommends.
Safety and compliance upgrades in Oldbury: questions
Is it cheaper to upgrade or replace our old door in Oldbury?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
What do you charge for safety and compliance upgrades in Oldbury?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Oldbury confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you quote from our existing inspection report in Oldbury?
Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.
Do you carry out automatic door safety upgrades in Oldbury?
Yes. We quote and manage upgrade work in Oldbury, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
What do you need from us for parking and access in Oldbury?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What power supply is needed for safety and compliance upgrades in Oldbury?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do businesses in Oldbury have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.