UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Safety and compliance upgrades · England

Safety and compliance upgrades in Merseyside

From a key-operated programme switch to new markings on the glass, small upgrades can make a real difference to safety at doors in Merseyside. Larger ones, such as side-screen guarding, are quoted and planned with you.

Area
Merseyside
Nation
England
Towns listed
19
Guide price
From £195 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Coverage across Merseyside

Here is how coverage works in Merseyside. You contact us with the address and what the door needs, we confirm the price in writing, and a specialist engineer working under our management attends on an agreed date. That applies to safety and compliance upgrades at a single shop door or across a whole estate of buildings, in any of the towns below or between them.

Towns listed in Merseyside: Liverpool, Birkenhead, St Helens, Southport, Wallasey, Bootle, Bebington, Huyton, Kirkby, Crosby, Prescot, Heswall, Maghull, Newton-le-Willows, Formby, Litherland, Halewood, Moreton, Haydock.

What to think about for safety and compliance upgrades in Merseyside

  • Doors serving care homes and hospitals in Merseyside may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
  • After upgrades, keep the record with your inspection report. Matching each change to its finding shows the actions have been closed off, which insurers often ask to see.
  • Busy retail and public buildings in Merseyside may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
  • Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
  • Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.

Safety and compliance upgrades in Merseyside: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Side-screen protection or guardingfrom £295per door, ex VAT
Battery backup for power-cut operation£395 – £695per door, ex VAT
Programme switch with key£145 – £345fitted, ex VAT
Upgrade package for an older door£795 – £2,495typical, after an inspection, ex VAT

Standards and rules in England

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Merseyside.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Book a free upgrade survey in Merseyside and find out which changes will make your older automatic door safer for the people using it.

Safety and compliance upgrades in Merseyside: questions

Our door in Merseyside has no battery backup. Do we need one?

It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.

Can you give me a price for safety and compliance upgrades in Merseyside?

Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Merseyside confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can upgrades in Merseyside be phased over time?

Yes. Each item is priced separately, so you can start with the high-priority findings and plan the rest for later, often at the next service visit. Your quote shows which items are urgent and which can sensibly wait, so you can budget for each phase.

Do you carry out automatic door safety upgrades in Merseyside?

Yes. We quote and manage upgrade work in Merseyside, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.

How are payments structured for work in Merseyside?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

What does the written quote for safety and compliance upgrades in Merseyside include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Which building regulations apply to a new automatic entrance in Merseyside?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Safety and compliance upgrades in Merseyside

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.