Covering Birkenhead and nearby
We cover the whole of the CH41, CH42, CH43 and CH49 postcode districts, along with nearby towns in Merseyside. You book each visit for safety and compliance upgrades directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Out-of-hours work is common in a city, where retail entrances may only be available before opening and office lobbies at weekends. Work in Birkenhead can be arranged early in the morning, in the evening or at weekends where the building needs it, with any extra cost shown in the written price.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Liverpool (1.9 miles), Wallasey (2.9 miles), Bebington (3.0 miles), Moreton (4.2 miles), Bootle (5.1 miles), Litherland (5.3 miles).
What to think about for safety and compliance upgrades in Birkenhead
- Listed buildings and conservation areas in Birkenhead may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Programme switches within reach of the public in Birkenhead should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
- After upgrades, keep the record with your inspection report. Matching each change to its finding shows the actions have been closed off, which insurers often ask to see.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Older shopfronts in Birkenhead often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
Safety and compliance upgrades in Birkenhead: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is safety and compliance upgrades for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Birkenhead.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Book a free upgrade survey in Birkenhead and find out which changes will make your older automatic door safer for the people using it.
Safety and compliance upgrades in Birkenhead: questions
Will you document the upgrades on our door in Birkenhead?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
What do you charge for safety and compliance upgrades in Birkenhead?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Birkenhead confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you carry out automatic door safety upgrades in Birkenhead?
Yes. We quote and manage upgrade work in Birkenhead, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
Our door in Birkenhead has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
How do you make sure the door works for disabled visitors in Birkenhead?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Is there a warranty on safety and compliance upgrades?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Who is responsible for automatic doors on escape routes in Birkenhead?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.