Covering Manchester and nearby
Engineers working under our management travel to addresses across the M1, M2, M4, M14, M15 and M40 postcode districts for safety and compliance upgrades. There is no depot or showroom in Manchester; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Universities, colleges and city hotels see sharp peaks of traffic at changeover times and check-in hours. For entrances like these in Manchester, opening width, hold-open time and sensor range are set so the door copes with crowds without wasting heat.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Salford (2.2 miles), Failsworth (3.4 miles), Droylsden (3.8 miles), Stretford (3.9 miles), Eccles (3.9 miles), Prestwich (4.1 miles).
What to think about for safety and compliance upgrades in Manchester
- Older shopfronts in Manchester often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Doors serving care homes and hospitals in Manchester may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Programme switches within reach of the public in Manchester should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
Safety and compliance upgrades in Manchester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is safety and compliance upgrades for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Manchester.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Book a free upgrade survey in Manchester and find out which changes will make your older automatic door safer for the people using it.
Safety and compliance upgrades in Manchester: questions
Our door in Manchester has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
How are prices worked out for safety and compliance upgrades in Manchester?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Manchester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long do upgrades take at premises in Manchester?
Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.
Will you document the upgrades on our door in Manchester?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Manchester is agreed before work starts.
What does the written quote for safety and compliance upgrades in Manchester include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Who is responsible for automatic doors on escape routes in Manchester?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.