Covering Battersea and nearby
If your building is in Battersea, or anywhere in the SW11 postcode district, we can arrange automatic swing doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Victorian and Georgian terraces are common across London, and converted buildings in Battersea may have steps, narrow hallways or shared front doors. A home door opener or an operator on a communal door has to work within those limits, and the engineer checks what will fit.
Nearby towns we also list for automatic swing doors (straight-line distance): Chelsea (1.1 miles), Clapham (1.2 miles), Westminster (1.8 miles), Fulham (1.9 miles), Brixton (2.2 miles), Kensington (2.4 miles).
What to think about for automatic swing doors in Battersea
- Office buildings in Battersea with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
- Schools in Battersea often prefer installation during half-term or the summer holidays. Operators are typically 2 to 4 weeks from order, so book the survey a few weeks before the break.
- Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
- Check the hinges first. Older doors in Battersea often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Doors on escape routes in Battersea usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
Automatic swing doors in Battersea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Battersea and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic swing doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ready to automate a busy door in Battersea? There is no charge for the survey and no obligation once you have the quote.
Automatic swing doors in Battersea: questions
Can you fit automatic swing door operators in Battersea?
Yes. We arrange supply and installation of swing operators for doors in Battersea and throughout Greater London. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.
What do you charge for automatic swing doors in Battersea?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Battersea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the survey for swing doors in Battersea free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
Can our existing doors in Battersea be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
What does the written quote for automatic swing doors in Battersea include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What power supply is needed for automatic swing doors in Battersea?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do businesses in Battersea have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.