Covering Brixton and nearby
Addresses anywhere in the SW2 postcode district can book automatic swing doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Brixton, so the price, the booking and the paperwork all come from one place.
Security matters on busy London streets, so entrances in Brixton often need doors that lock firmly at night and work with alarms, shutters or access control. The operator, the locking and any shutter are planned together so they work in the right order.
Nearby towns we also list for automatic swing doors (straight-line distance): Clapham (1.4 miles), Peckham (1.7 miles), Battersea (2.2 miles), Westminster (2.5 miles), Streatham (2.8 miles), Chelsea (3.1 miles).
What to think about for automatic swing doors in Brixton
- Check the hinges first. Older doors in Brixton often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Power comes from a fused spur near the head of the door. In older buildings in Brixton with solid walls, allow time for surface trunking or chasing to reach the operator.
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- Office buildings in Brixton with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
Automatic swing doors in Brixton: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Brixton.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Want doors in Brixton that open without a push? Contact us for a free survey and a fixed, itemised quote for automatic swing doors.
Automatic swing doors in Brixton: questions
Can our existing doors in Brixton be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
How are prices worked out for automatic swing doors in Brixton?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Brixton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit automatic swing door operators in Brixton?
Yes. We arrange supply and installation of swing operators for doors in Brixton and throughout Greater London. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.
What paperwork do we get for automated doors in Brixton?
You receive the test record, a site-specific risk assessment, user instructions and the conformity paperwork for each door. When an existing manual door is motorised, whoever does it may take on the manufacturer's duties for the finished door, so the Declaration of Conformity and instructions are handed over at the end of the job.
Do I need permission from a landlord or the council before work in Brixton?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
What happens once the installation in Brixton is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Brixton?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.