Covering Battersea and nearby
If your building is in Battersea, or anywhere in the SW11 postcode district, we can arrange telescopic sliding doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Victorian and Georgian terraces are common across London, and converted buildings in Battersea may have steps, narrow hallways or shared front doors. A home door opener or an operator on a communal door has to work within those limits, and the engineer checks what will fit.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Chelsea (1.1 miles), Clapham (1.2 miles), Westminster (1.8 miles), Fulham (1.9 miles), Brixton (2.2 miles), Kensington (2.4 miles).
What to think about for telescopic sliding doors in Battersea
- Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
- A telescopic header is deeper than a standard one. In older buildings in Battersea with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
- Entrances across Greater London that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- Medical centres in Battersea often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
Telescopic sliding doors in Battersea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Battersea.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Try the guide price tool for a quick figure, then arrange a free survey in Battersea to fix the price for your telescopic entrance.
Telescopic sliding doors in Battersea: questions
Is the telescopic door survey in Battersea really free?
Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.
What is the guide price for telescopic sliding doors in Battersea?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Battersea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a telescopic door in Battersea work with our fire alarm?
It can. The operator can take a signal from the fire alarm panel so the door opens and stays open, or does whatever the fire strategy for the building requires. The panel connection is usually made by your alarm engineer, and the quote shows who is responsible for each part of the work.
How much wider will our entrance in Battersea be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Battersea shows the exact clear width before you commit.
What does the free site survey in Battersea involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for telescopic sliding doors, with drawings where the door type needs them.
What should I send before the survey in Battersea?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for telescopic sliding doors together more easily.
Do businesses in Battersea have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.