Covering Benfleet and nearby
Addresses anywhere in the SS7 postcode district can book automatic swing doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Benfleet, so the price, the booking and the paperwork all come from one place.
Libraries, health centres and council buildings in Benfleet still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for automatic swing doors (straight-line distance): Hadleigh (2.2 miles), Canvey Island (2.3 miles), Rayleigh (3.0 miles), Leigh-on-Sea (3.9 miles), Wickford (4.3 miles), Basildon (4.5 miles).
What to think about for automatic swing doors in Benfleet
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- Hospital and care home corridors in Benfleet need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Power comes from a fused spur near the head of the door. In older buildings in Benfleet with solid walls, allow time for surface trunking or chasing to reach the operator.
- Office buildings in Benfleet with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
- Doors on escape routes in Benfleet usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
Automatic swing doors in Benfleet: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Benfleet.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Want doors in Benfleet that open without a push? Contact us for a free survey and a fixed, itemised quote for automatic swing doors.
Automatic swing doors in Benfleet: questions
Can you fit automatic swing door operators in Benfleet?
Yes. We arrange supply and installation of swing operators for doors in Benfleet and throughout Essex. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.
Can you give me a price for automatic swing doors in Benfleet?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Benfleet confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will the swing operator in Benfleet work with our fire alarm?
It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.
Do you fit low-energy operators in Benfleet as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
What happens to the old door when a new one is fitted in Benfleet?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What power supply is needed for automatic swing doors in Benfleet?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Benfleet?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.