Covering Leigh-on-Sea and nearby
From shops and surgeries to schools, care homes and private houses, any building in the SS9 postcode district can be covered for automatic swing doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Many buildings in Leigh-on-Sea are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic swing doors (straight-line distance): Hadleigh (1.8 miles), Southend-on-Sea (2.8 miles), Canvey Island (3.3 miles), Rayleigh (3.5 miles), Benfleet (3.9 miles), Wickford (7.2 miles).
What to think about for automatic swing doors in Leigh-on-Sea
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Power comes from a fused spur near the head of the door. In older buildings in Leigh-on-Sea with solid walls, allow time for surface trunking or chasing to reach the operator.
- Check the hinges first. Older doors in Leigh-on-Sea often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
- Schools in Leigh-on-Sea often prefer installation during half-term or the summer holidays. Operators are typically 2 to 4 weeks from order, so book the survey a few weeks before the break.
Automatic swing doors in Leigh-on-Sea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Leigh-on-Sea and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic swing doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey in Leigh-on-Sea, and an engineer will check your doors, hinges and fire labels and recommend the right operator.
Automatic swing doors in Leigh-on-Sea: questions
Is the survey for swing doors in Leigh-on-Sea free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
Is there a guide price for automatic swing doors in Leigh-on-Sea?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Leigh-on-Sea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you service swing doors in Leigh-on-Sea after fitting?
Yes. We can arrange planned servicing, with each visit priced in writing before an engineer attends. A trained engineer should check the safety functions at least once a year, and busy corridors, schools and hospitals usually need more frequent visits. Staff should also carry out simple daily checks.
Can our existing doors in Leigh-on-Sea be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
What happens once the installation in Leigh-on-Sea is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What is the lead time for automatic swing doors in Leigh-on-Sea?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Leigh-on-Sea?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.