Covering Benfleet and nearby
Engineers working under our management travel to addresses across the SS7 postcode district for revolving doors. There is no depot or showroom in Benfleet; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Independent businesses in Benfleet often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for revolving doors (straight-line distance): Hadleigh (2.2 miles), Canvey Island (2.3 miles), Rayleigh (3.0 miles), Leigh-on-Sea (3.9 miles), Wickford (4.3 miles), Basildon (4.5 miles).
What to think about for revolving doors in Benfleet
- Planned servicing is essential on revolving doors because wing edges, stop buttons and sensors protect people on every turn. Budget for regular visits from the start, with each visit priced in writing.
- Plan the pass door first. Wheelchair users, pushchairs and deliveries need an accessible powered door beside the drum, and it should be easy to find from the street in Benfleet, with clear signs.
- Revolving doors with curved glass drum walls have longer lead times. Allow for them in any refurbishment programme across Essex, and confirm dates before booking floor layers or shopfitters.
- Night security needs thought. Decide whether the wings will lock across the drum or a night shield is needed, and how the pass door and any shutters will be secured.
- Tall buildings in Benfleet can pull a strong draught through an open entrance. A revolving door controls this better than sliding doors, which is one reason office towers use them.
Revolving doors in Benfleet: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £29,995 to £59,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Manual revolving door | from £14,995 | installed, ex VAT; priced on survey |
| Automatic revolving door, three or four wings, about 2.1 m diameter | £29,995 – £59,995 | installed, ex VAT |
| Large-diameter or high-capacity revolving doors | Priced on survey | often with a side swing or sliding door alongside |
| Side door for wheelchair users, prams and escape | see sliding and swing doors | usually needed alongside a revolving door |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Benfleet.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Send photos and any drawings of the entrance in Benfleet, and we will come back with options for a revolving door and an accessible pass door.
Revolving doors in Benfleet: questions
How long does a revolving door project in Benfleet take?
Revolving doors are typically 8 to 14 weeks from order, once drawings are approved. On site, an automatic revolving door usually takes several days, covering floor preparation, drum and canopy, wings, drive and commissioning. We agree the programme with you and plan how visitors will get in while the work is done.
How are prices worked out for revolving doors in Benfleet?
Our guide is £29,995 to £59,995 excluding VAT (per automatic door), the same guide prices we use across the UK. The free site survey in Benfleet confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who services a revolving door in Benfleet after installation?
We can, with each visit priced in writing before an engineer attends. Revolving doors should have their safety sensors, stop buttons and wing edges checked by a trained engineer at least once a year, and busy entrances usually need more frequent visits. Staff should also make simple daily checks and keep a record.
Can our reception in Benfleet stay open during installation?
Usually, if there is a second entrance or the pass door can be fitted first. We stage the work so the building stays secure overnight and visitors are directed clearly. Where the revolving door is the only way in, we discuss weekend or out-of-hours working, with any extra cost shown in the quote.
What does the written quote for revolving doors in Benfleet include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What power supply is needed for revolving doors in Benfleet?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do businesses in Benfleet have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.