Covering Derby and nearby
If your building is in Derby, or anywhere in the DE1, DE3, DE21, DE22, DE23 and DE24 postcode districts, we can arrange automatic internal doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Universities, colleges and city hotels see sharp peaks of traffic at changeover times and check-in hours. For entrances like these in Derby, opening width, hold-open time and sensor range are set so the door copes with crowds without wasting heat.
Nearby towns we also list for automatic internal doors (straight-line distance): Belper (6.9 miles), Ilkeston (7.7 miles), Heanor (8.1 miles), Ripley (8.3 miles), Long Eaton (8.7 miles), Eastwood (9.1 miles).
What to think about for automatic internal doors in Derby
- Care homes in Derby often have residents with dementia. Think about which doors should open freely and which should be controlled, and agree that as a care decision before choosing controls.
- Plan the work around the building's routine. Clinical areas, classrooms and kitchens in Derby may need out-of-hours working, which should be agreed and priced up front.
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Offices in Derby with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
- Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
Automatic internal doors in Derby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Derby and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic internal doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Tell us which corridor, ward or office doors are causing problems in Derby, and we will arrange a site visit and a written quote.
Automatic internal doors in Derby: questions
Can internal doors at our offices in Derby be linked to access control?
Yes. Card readers, fob readers or keypads can control who passes into staff areas, and the door opens automatically once access is granted. Locks release on the fire alarm where the fire strategy requires, and we can connect to an existing access control system or supply a standalone one.
How are prices worked out for automatic internal doors in Derby?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Derby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit automatic doors in a school in Derby?
Yes. Corridor fire doors, dining halls and doors to accessible facilities are common. We usually plan the work for school holidays or after hours, and agree the programme with the school in writing so safeguarding and fire arrangements are maintained throughout.
Can you automate the corridor doors in our care home in Derby?
Yes. We survey each door, including its fire rating, hinges, frame and power, and quote a fixed price. Doors can be set to open gently and slowly, with extra safety sensors where residents are frail. Work is planned around your care routines and agreed with the home manager.
What is the lead time for automatic internal doors in Derby?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What does the free site survey in Derby involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic internal doors, with drawings where the door type needs them.
Who is responsible for automatic doors on escape routes in Derby?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.