Covering Derby and nearby
Homes, businesses and public buildings throughout the DE1, DE3, DE21, DE22, DE23 and DE24 postcode districts can arrange accessible door operators with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Derby for the job rather than working from premises in town.
Out-of-hours work is common in a city, where retail entrances may only be available before opening and office lobbies at weekends. Work in Derby can be arranged early in the morning, in the evening or at weekends where the building needs it, with any extra cost shown in the written price.
Nearby towns we also list for accessible door operators (straight-line distance): Belper (6.9 miles), Ilkeston (7.7 miles), Heanor (8.1 miles), Ripley (8.3 miles), Long Eaton (8.7 miles), Eastwood (9.1 miles).
What to think about for accessible door operators in Derby
- Accessible toilets need a pad inside and out, a lock button that disables the outside pad while the room is in use, and a way for staff to open the door in an emergency.
- Think about the whole route, not just one door. A step, a heavy inner door or a tight turn after an automatic entrance can still stop a wheelchair user getting where they need to go.
- Offices and shared buildings in Derby often have doors used by both staff and visitors. Power assist for everyday use, with a push pad for those who need full opening, keeps the door easy for everyone.
- Community halls and churches in Derby may only be busy at certain times. A timer or key switch can keep the operator on while the building is open and leave the door manual the rest of the time.
- Check how heavy the door is to push now. If the closer is set very strong for fire or wind reasons, the operator has to be chosen to suit, and the closer may need adjusting.
Accessible door operators in Derby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for accessible door operators and book a survey in Derby.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Want to make an entrance in Derby easier for wheelchair users and parents with pushchairs? Request a survey and we will quote a low-energy operator for it.
Accessible door operators in Derby: questions
Our building in Derby is listed. Can we still have an operator?
Often, yes. Low-energy operators are compact and can sometimes be mounted on the inside face, with cabling hidden. Listed building consent may still be needed for fixings or new switches, so check with the planning authority. We can supply product details for an application.
Is there a guide price for accessible door operators in Derby?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Derby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the operator be serviced after installation in Derby?
Yes. We can arrange visits where the speed, force, safety settings, push pads and closer are checked and a written record is left. You agree the cost of each visit in writing beforehand, and how often we come depends on how much the door is used.
How soon can an operator be fitted at our premises in Derby?
Lead time is typically 2 to 4 weeks from accepting the quote, depending on the operator and any parts the door needs. We give the expected lead time in writing with the quote, and agree the fitting date with you once the parts are ready.
What happens once the installation in Derby is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What do you need from us for parking and access in Derby?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Do businesses in Derby have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.