Coverage across Bedfordshire
There is no branch to visit in Bedfordshire; instead, specialist engineers working under our management travel to you. That keeps automatic internal doors available across the whole area, including smaller towns and rural addresses. The page for each of the 5 towns we list below sets out nearby places, guide prices and the questions people usually ask.
Towns listed in Bedfordshire: Luton, Bedford, Dunstable, Leighton Buzzard, Kempston.
What to think about for automatic internal doors in Bedfordshire
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Each automated door needs power at the head. In older buildings in Bedfordshire, running new supplies through finished corridors can be a significant part of the cost.
- Hospitals in Bedfordshire usually have estates teams with their own standards for door widths, controls and fire alarm interfaces. Share those early so the quote matches them.
- Care homes in Bedfordshire often have residents with dementia. Think about which doors should open freely and which should be controlled, and agree that as a care decision before choosing controls.
Automatic internal doors in Bedfordshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Bedfordshire and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic internal doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ask for a fixed price on automatic internal doors in Bedfordshire. The quote covers operators, safety devices, fire alarm links and handover records.
Automatic internal doors in Bedfordshire: questions
Do you work in hospitals in Bedfordshire?
Yes. We work to the estates team's requirements for door widths, controls, infection control and fire alarm interfaces, and provide method statements, insurance details and the documents they ask for. Work on wards is usually planned out of hours or in phases.
What price range should I expect for automatic internal doors in Bedfordshire?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Bedfordshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can internal doors at our offices in Bedfordshire be linked to access control?
Yes. Card readers, fob readers or keypads can control who passes into staff areas, and the door opens automatically once access is granted. Locks release on the fire alarm where the fire strategy requires, and we can connect to an existing access control system or supply a standalone one.
Can you fit automatic doors in a school in Bedfordshire?
Yes. Corridor fire doors, dining halls and doors to accessible facilities are common. We usually plan the work for school holidays or after hours, and agree the programme with the school in writing so safeguarding and fire arrangements are maintained throughout.
What happens once the installation in Bedfordshire is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What does the free site survey in Bedfordshire involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic internal doors, with drawings where the door type needs them.
Which building regulations apply to a new automatic entrance in Bedfordshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.