Coverage across South Yorkshire
From large town centres to quiet villages, entrances across South Yorkshire vary a great deal, and the right approach to automatic folding doors varies with them. A surgery door used by patients with walking frames needs different settings from a supermarket entrance, so the engineer looks at the actual door first. The towns we list in this area currently number 8.
Towns listed in South Yorkshire: Sheffield, Rotherham, Doncaster, Barnsley, Chapeltown, Rawmarsh, Maltby, Thorne.
What to think about for automatic folding doors in South Yorkshire
- Small units in South Yorkshire often have their only power supply at the back of the shop. The operator needs a fused spur at the head of the door, so allow for a cable run.
- Pavements in older parts of South Yorkshire often slope or dip at the threshold. Bottom pivots need a level, solid floor, so the survey records levels and any work needed.
- Busy food and drink outlets in South Yorkshire may want the door to stay folded open in summer and run automatically in winter. Hold-open and automatic modes on the programme switch make that easy.
- Pharmacies in South Yorkshire with queues near the counter may want the door to fold away from the waiting area, with presence sensors set to ignore people standing nearby.
- Glass kiosks in shopping centres usually have landlord fit-out rules. Ask centre management about working hours, power and alarm connections before installation is booked, so the date does not slip.
Automatic folding doors in South Yorkshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Automatic folding door, up to about 2 m clear opening | £5,995 – £10,995 | installed, ex VAT |
| Folding door with break-out for an escape route | top of range or on survey | depends on the fire strategy |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in South Yorkshire.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Try the guide price tool first, then let us measure your opening in South Yorkshire and fix the price in writing.
Automatic folding doors in South Yorkshire: questions
Do we need permission to change the shop door in South Yorkshire?
It depends on the building. Changing how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. If you rent the unit, the landlord will usually need to approve the work too. We flag both at the survey.
How are prices worked out for automatic folding doors in South Yorkshire?
Our guide starts from £5,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in South Yorkshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a folding door in South Yorkshire open with a push button instead of a sensor?
Yes. Many shops use a radar sensor so the door opens as customers approach, but push pads, wave-to-open switches or a key switch can be used instead or as well. Internal doors often use push buttons, so the door only opens when someone needs it.
Can you fit the door in South Yorkshire without closing the shop?
Usually. Most folding doors take about a day on site, and we can start early, work in the evening or at a weekend so trading carries on. The opening is secured if work runs past closing time, and any out-of-hours cost is shown separately in the quote.
Do you service doors in South Yorkshire after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What happens once the installation in South Yorkshire is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in South Yorkshire?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.