Covering Tunbridge Wells and nearby
Sites across the TN1, TN2, TN3 and TN4 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Tunbridge Wells for automatic folding doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Town-centre buildings in Tunbridge Wells range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for automatic folding doors (straight-line distance): Tonbridge (4.3 miles), Crowborough (6.6 miles), Sevenoaks (10.2 miles), East Grinstead (11.7 miles), Uckfield (13.4 miles), Maidstone (14.4 miles).
What to think about for automatic folding doors in Tunbridge Wells
- Check what sits beside the doorway. Displays, A-boards, bins and queues in the area where the leaves fold can stop the door or set off its sensors, so plan a clear zone.
- Small units in Tunbridge Wells often have their only power supply at the back of the shop. The operator needs a fused spur at the head of the door, so allow for a cable run.
- Pharmacies in Tunbridge Wells with queues near the counter may want the door to fold away from the waiting area, with presence sensors set to ignore people standing nearby.
- Folding doors have more hinges than sliding doors. Planned servicing at intervals based on how busy the door is keeps hinges, pivots and finger guards in good order.
- Terraced shopfronts across Kent sometimes have timber frames and fascias that need strengthening to carry a header. The survey checks what the operator can be fixed to.
Automatic folding doors in Tunbridge Wells: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Automatic folding door, up to about 2 m clear opening | £5,995 – £10,995 | installed, ex VAT |
| Folding door with break-out for an escape route | top of range or on survey | depends on the fire strategy |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic folding doors and book a survey in Tunbridge Wells.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us a photo of your frontage in Tunbridge Wells and its width, and we will arrange a free survey for an automatic folding door.
Automatic folding doors in Tunbridge Wells: questions
Do you fit automatic folding doors in Tunbridge Wells?
Yes. We arrange supply and installation of automatic folding doors in Tunbridge Wells and across Kent. Specialist automatic door engineers working under our management survey and fit the door, and we remain the contracting party, so you have one point of contact from quote to handover.
How much should I budget for automatic folding doors in Tunbridge Wells?
Our guide starts from £5,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Tunbridge Wells confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a folding door in Tunbridge Wells open with a push button instead of a sensor?
Yes. Many shops use a radar sensor so the door opens as customers approach, but push pads, wave-to-open switches or a key switch can be used instead or as well. Internal doors often use push buttons, so the door only opens when someone needs it.
Will a folding door fit our narrow shopfront in Tunbridge Wells?
Very often, yes. Folding doors need almost no wall space beside the opening, so they suit frontages that run from wall to wall. The survey checks the opening, the structure above and the space for the folded leaves, and the drawing shows exactly how much clear width you will get.
How much disruption should we expect while the work is done in Tunbridge Wells?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
What power supply is needed for automatic folding doors in Tunbridge Wells?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Tunbridge Wells?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.