Covering Alton and nearby
If your building is in Alton, or anywhere in the GU34 postcode district, we can arrange automatic door servicing. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Many buildings in Alton are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic door servicing (straight-line distance): Bordon (5.5 miles), Farnham (8.8 miles), Basingstoke (9.2 miles), Fleet (11.1 miles), Aldershot (11.4 miles), Haslemere (12.3 miles).
What to think about for automatic door servicing in Alton
- Schools and colleges in Alton often prefer servicing during holidays or after hours. Plan visits early in the year so they fall when the buildings are quiet.
- Older doors in Alton may need parts replaced more often as they age. A service history that tracks wear helps you budget for repairs or a new drive unit before a breakdown.
- Care homes and hospitals in Alton often need visits planned around mealtimes, medication rounds and visiting hours, so the door is not out of use at the busiest times.
- Keep the programme switch key and any operator access keys on site. Engineers need them to change modes and test the door properly during the visit.
- Battery backup units wear out over time. Testing them at each service shows whether the door will still open or close safely in a power cut.
Automatic door servicing in Alton: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Single service visit, first door on site | £145 – £245 | checks, adjustment and service record, ex VAT; homes £174 – £294 inc VAT |
| Each additional door on the same visit | £60 – £120 | ex VAT; homes £72 – £144 inc VAT |
| Service contract, one visit a year | £145 – £245 | first door, per year, visit booked in advance at a fixed price, ex VAT; homes £174 – £294 inc VAT |
| Service contract, two visits a year | £270 – £460 | first door, per year, ex VAT; additional doors at the per-visit rate above; homes £324 – £552 inc VAT |
No law sets a fixed service interval. We recommend a safety check by a trained engineer at least once a year, and more frequent visits for busy doors. Repairs found during a service are quoted before they are done.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Alton and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Keep your maintenance records complete. Arrange planned visits for automatic doors in Alton, each one priced in advance and documented afterwards.
Automatic door servicing in Alton: questions
Will servicing help with our insurer or landlord in Alton?
Many insurers and landlords ask for evidence that automatic doors are maintained. A written service report for each door, kept in a logbook or digital folder, is the usual way to show that. If they ask for a risk assessment against BS EN 16005, a safety inspection can be added.
What do you charge for automatic door servicing in Alton?
Our guide starts from £145 excluding VAT (per visit, first door), the same guide price we use across the UK. For homes that is from £174 including VAT. We agree the visit price in writing before an engineer attends in Alton, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you service revolving and folding doors in Alton?
Yes, as well as sliding and swing doors. Revolving and folding doors have more moving parts and extra safety devices, so their services take longer and are priced accordingly. The checklist used for each door type is set out in its service report.
Can you service doors in Alton outside opening hours?
Visits early in the morning, in the evening or at weekends can often be arranged where the building needs it, although they may be priced differently. Tell us your opening hours and busiest times when you book, and the visit price we agree will reflect the time slot.
Are parts quoted before they are fitted?
Always. If a repair or service in Alton needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
What happens during a visit in Alton?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
Who is responsible for automatic doors on escape routes in Alton?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.