Covering Barnet and nearby
From shops and surgeries to schools, care homes and private houses, any building in the EN4, EN5 and N20 postcode districts can be covered for automatic door servicing. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Mixed-use blocks in Barnet, with shops or offices at ground level and flats above, often have communal entrances run by a managing agent. Doors there have to suit residents, deliveries and visitors, and approval from the freeholder or agent usually comes before work starts.
Nearby towns we also list for automatic door servicing (straight-line distance): Potters Bar (3.1 miles), Borehamwood (3.3 miles), Finchley (3.4 miles), Edgware (4.1 miles), Enfield (4.9 miles), Wood Green (5.0 miles).
What to think about for automatic door servicing in Barnet
- Care homes and hospitals in Barnet often need visits planned around mealtimes, medication rounds and visiting hours, so the door is not out of use at the busiest times.
- Schools and colleges in Barnet often prefer servicing during holidays or after hours. Plan visits early in the year so they fall when the buildings are quiet.
- Doors on escape routes need their break-out or power-failure opening tested at every service. Tell us which doors serve escape routes so the engineer checks the right functions.
- Battery backup units wear out over time. Testing them at each service shows whether the door will still open or close safely in a power cut.
- Exposed entrances collect grit, leaves and rain. Weather-facing doors benefit from extra attention to the floor guide, brush strips and sensor settings at each service.
Automatic door servicing in Barnet: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Single service visit, first door on site | £145 – £245 | checks, adjustment and service record, ex VAT; homes £174 – £294 inc VAT |
| Each additional door on the same visit | £60 – £120 | ex VAT; homes £72 – £144 inc VAT |
| Service contract, one visit a year | £145 – £245 | first door, per year, visit booked in advance at a fixed price, ex VAT; homes £174 – £294 inc VAT |
| Service contract, two visits a year | £270 – £460 | first door, per year, ex VAT; additional doors at the per-visit rate above; homes £324 – £552 inc VAT |
No law sets a fixed service interval. We recommend a safety check by a trained engineer at least once a year, and more frequent visits for busy doors. Repairs found during a service are quoted before they are done.
Standards and rules in England
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Barnet and how much the site depends on the door.
- Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
- Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
- Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.
Get in touch about automatic door servicing in Barnet. We will suggest an interval to suit how much each door is used and price the visits up front.
Automatic door servicing in Barnet: questions
What happens if the service in Barnet finds a fault?
The engineer explains what they found and deals with small issues as part of the visit. Worn parts or longer repairs are quoted to you first and only carried out once you agree. The service report records the fault so it can be tracked at later visits.
What do you charge for automatic door servicing in Barnet?
Our guide starts from £145 excluding VAT (per visit, first door), the same guide price we use across the UK. For homes that is from £174 including VAT. We agree the visit price in writing before an engineer attends in Barnet, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Will servicing help with our insurer or landlord in Barnet?
Many insurers and landlords ask for evidence that automatic doors are maintained. A written service report for each door, kept in a logbook or digital folder, is the usual way to show that. If they ask for a risk assessment against BS EN 16005, a safety inspection can be added.
How often should doors in Barnet be serviced?
There is no fixed legal interval. We recommend a trained engineer checks the safety functions at least once a year, with the interval set by the manufacturer's instructions and how heavily the door is used. Busy entrances, such as shops and surgeries, are often serviced every six months.
Which makes of automatic door can you work on in Barnet?
Engineers working under our management work on most makes of automatic door, including sliding, swing, folding, telescopic and revolving types. Some older or obsolete operators have limited parts availability. If that applies, we explain the options, which may include a replacement drive unit on the existing frame, and quote them before anything is ordered.
Are parts quoted before they are fitted?
Always. If a repair or service in Barnet needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Who is responsible for automatic doors on escape routes in Barnet?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.