Covering Barnet and nearby
Sites across the EN4, EN5 and N20 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Barnet for safety and compliance upgrades as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Office entrances in Barnet commonly combine automatic doors with turnstiles, concierge desks and card access. When the operator is wired into those systems, staff pass through quickly, visitors are let in from reception and the building locks down outside working hours.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Potters Bar (3.1 miles), Borehamwood (3.3 miles), Finchley (3.4 miles), Edgware (4.1 miles), Enfield (4.9 miles), Wood Green (5.0 miles).
What to think about for safety and compliance upgrades in Barnet
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
- Busy retail and public buildings in Barnet may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
- Older shopfronts in Barnet often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
- If your building in Barnet has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
Safety and compliance upgrades in Barnet: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Barnet and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send us your inspection report for doors in Barnet, and we will arrange a free survey and quote each upgrade as a separate item.
Safety and compliance upgrades in Barnet: questions
Will you document the upgrades on our door in Barnet?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
What do you charge for safety and compliance upgrades in Barnet?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Barnet confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you carry out automatic door safety upgrades in Barnet?
Yes. We quote and manage upgrade work in Barnet, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
Do you need an inspection before upgrading a door in Barnet?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
How do you make sure the door works for disabled visitors in Barnet?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Can installation in Barnet happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Who is responsible for automatic doors on escape routes in Barnet?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.