UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · West Yorkshire

Automatic door refurbishment in Horsforth

Planning a refresh of your building in Horsforth? Refurbishing the automatic door at the same time, with new glass, seals and a refinished frame, keeps the entrance in step with the rest of the work.

Town
Horsforth
Area
West Yorkshire
Postcodes
LS18
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Horsforth and nearby

Homes, businesses and public buildings throughout the LS18 postcode district can arrange automatic door refurbishment with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Horsforth for the job rather than working from premises in town.

GP surgeries, dental practices and pharmacies in Horsforth often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Yeadon (2.5 miles), Pudsey (3.4 miles), Guiseley (3.8 miles), Leeds (4.9 miles), Shipley (5.3 miles), Bradford (5.8 miles).

What to think about for automatic door refurbishment in Horsforth

  • High street doors in Horsforth often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
  • Exposed entrances in Horsforth suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • Floors around the door in Horsforth may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
  • Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.

Automatic door refurbishment in Horsforth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Horsforth and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on automatic door refurbishment separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Book a free refurbishment survey in Horsforth. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.

Automatic door refurbishment in Horsforth: questions

Will our entrance in Horsforth stay open during refurbishment?

Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.

What will automatic door refurbishment in Horsforth cost?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Horsforth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Do you set up the door again after refurbishing it in Horsforth?

Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.

Is it worth refurbishing an old door at our premises in Horsforth?

If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.

What should I send before the survey in Horsforth?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic door refurbishment together more easily.

What happens to the old door when a new one is fitted in Horsforth?

If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.

Which building regulations apply to a new automatic entrance in Horsforth?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Automatic door refurbishment in Horsforth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.