Coverage across Merseyside
Our coverage of Merseyside is not tied to a depot or a showroom. Engineers who carry out accessible door operators for us travel to each site, so a farm shop down a country lane goes through the same process as a city-centre office. Every job is priced in writing before work starts, and the town list below currently numbers 19.
Towns listed in Merseyside: Liverpool, Birkenhead, St Helens, Southport, Wallasey, Bootle, Bebington, Huyton, Kirkby, Crosby, Prescot, Heswall, Maghull, Newton-le-Willows, Formby, Litherland, Halewood, Moreton, Haydock.
What to think about for accessible door operators in Merseyside
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
- Think about the whole route, not just one door. A step, a heavy inner door or a tight turn after an automatic entrance can still stop a wheelchair user getting where they need to go.
- Doors in exposed spots around Merseyside can be caught by the wind. A low-energy operator has limited force, so the survey checks whether the door will open and close reliably on a gusty day.
- GP surgeries and clinics in Merseyside often want the main entrance and the accessible toilet done together. Pricing both at one survey saves a second visit and keeps the controls consistent.
- Accessible toilets need a pad inside and out, a lock button that disables the outside pad while the room is in use, and a way for staff to open the door in an emergency.
Accessible door operators in Merseyside: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is accessible door operators for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Merseyside.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Get the door at your premises in Merseyside opening at the press of a pad. Start with a free survey and a fixed written quote.
Accessible door operators in Merseyside: questions
Can the operator be serviced after installation in Merseyside?
Yes. We can arrange visits where the speed, force, safety settings, push pads and closer are checked and a written record is left. You agree the cost of each visit in writing beforehand, and how often we come depends on how much the door is used.
How are prices worked out for accessible door operators in Merseyside?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Merseyside confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit an accessible operator to a door at our surgery in Merseyside?
Yes, in most cases. We check the door, hinges, frame and the wall above at a free survey, then quote a fixed price for the operator, push pads and any repairs needed first. Fitting usually takes half a day to a day per door, planned around your opening hours.
Our building in Merseyside is listed. Can we still have an operator?
Often, yes. Low-energy operators are compact and can sometimes be mounted on the inside face, with cabling hidden. Listed building consent may still be needed for fixings or new switches, so check with the planning authority. We can supply product details for an application.
What power supply is needed for accessible door operators in Merseyside?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do you service doors in Merseyside after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Which building regulations apply to a new automatic entrance in Merseyside?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.