Coverage across Merseyside
Typical clients for access control for automatic doors include businesses, public buildings, care settings and households that rely on a door opening every time. Wherever the address is in Merseyside, the price is set out in writing before work starts, and the job is done by specialist engineers under our management. The towns we list here currently number 19.
Towns listed in Merseyside: Liverpool, Birkenhead, St Helens, Southport, Wallasey, Bootle, Bebington, Huyton, Kirkby, Crosby, Prescot, Heswall, Maghull, Newton-le-Willows, Formby, Litherland, Halewood, Moreton, Haydock.
What to think about for access control for automatic doors in Merseyside
- Doors on escape routes need locks that release on alarm and on power loss. Check the fire strategy, or ask your fire risk assessor, before choosing a lock.
- Residential blocks in Merseyside usually have a managing agent or housing provider who sets the rules for fobs, visitors and fire alarm behaviour. Involve them early.
- Cable routes matter. Running cables between a reader, a controller and the operator through finished walls and ceilings can be a large share of the cost.
- A video entry system needs a network or cable link between the door and wherever visitors are answered. Check the route before the survey, especially across car parks or between buildings.
- Healthcare sites in Merseyside often control access to wards and staff areas. Think about how visitors, porters and emergency teams will get through at every hour.
Access control for automatic doors in Merseyside: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Intercom or door entry tie-in | from £495 | priced on survey, ex VAT |
| Timed locking and night mode set-up | included with the above | programmed at commissioning |
| Electric lock added to an automatic door | on survey | depends on the door and the lock type |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Merseyside and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on access control for automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
From a single keypad to readers on every entrance, get a written quote for access control in Merseyside, starting with a free survey.
Access control for automatic doors in Merseyside: questions
Do you work with our security installer in Merseyside?
Yes. Where a security installer already looks after your access control, we usually handle the door, the lock and the link to the operator, and they handle the reader, controller and permissions. The quote sets out who does what so nothing falls between the two.
How are prices worked out for access control for automatic doors in Merseyside?
Our guide starts from £795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Merseyside confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit fob entry to a residential block in Merseyside?
Yes. We can fit fob readers and video entry to an automatic communal door, set up so residents use fobs and visitors call the flat. Fire alarm and power-loss behaviour are agreed with the managing agent or housing provider before we commission the door.
Can our door in Merseyside run on a schedule?
Yes. The door can open freely during opening hours and switch to card or code entry with the lock engaged at night, at weekends and on holiday dates. Staff can override the schedule with a key switch if they need to.
What happens once the installation in Merseyside is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What power supply is needed for access control for automatic doors in Merseyside?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Merseyside?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.