Covering Tonbridge and nearby
Our coverage of Tonbridge takes in the TN9, TN10 and TN11 postcode districts and the neighbouring parts of Kent. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about accessible door operators and we will confirm the arrangements and the price in writing.
In Tonbridge, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for accessible door operators (straight-line distance): Tunbridge Wells (4.3 miles), Sevenoaks (6.5 miles), Crowborough (10.4 miles), Maidstone (11.6 miles), East Grinstead (13.1 miles), Orpington (14.5 miles).
What to think about for accessible door operators in Tonbridge
- Accessible toilets need a pad inside and out, a lock button that disables the outside pad while the room is in use, and a way for staff to open the door in an emergency.
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
- Think about the whole route, not just one door. A step, a heavy inner door or a tight turn after an automatic entrance can still stop a wheelchair user getting where they need to go.
- Power is usually taken from a fused spur near the head of the door. If there is no supply close by, allow for an electrician to run one, ideally hidden in trunking or the wall.
- If the door is a fire door, find its rating or records before the survey. Fixings and cabling must respect the rating, and the operator must release the door on the fire alarm.
Accessible door operators in Tonbridge: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is accessible door operators for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Tonbridge.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Make a heavy door in Tonbridge easy for everyone to open. Ask for a site survey and a written quote, with no obligation to go ahead.
Accessible door operators in Tonbridge: questions
How soon can an operator be fitted at our premises in Tonbridge?
Lead time is typically 2 to 4 weeks from accepting the quote, depending on the operator and any parts the door needs. We give the expected lead time in writing with the quote, and agree the fitting date with you once the parts are ready.
What do you charge for accessible door operators in Tonbridge?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Tonbridge confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the operator be serviced after installation in Tonbridge?
Yes. We can arrange visits where the speed, force, safety settings, push pads and closer are checked and a written record is left. You agree the cost of each visit in writing beforehand, and how often we come depends on how much the door is used.
What if the door in Tonbridge is too heavy for a low-energy operator?
Some large or exposed doors need a full-energy operator with safety sensors, or a lighter replacement door, to work reliably. The survey will tell you which, and the quote explains why. Where it will work, we offer the low-energy option first because it is simpler to live with.
What happens once the installation in Tonbridge is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do you service doors in Tonbridge after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Tonbridge?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.