Coverage across Renfrewshire and Inverclyde
There is no branch to visit in Renfrewshire and Inverclyde; instead, specialist engineers working under our management travel to you. That keeps touch-free and push-button activation available across the whole area, including smaller towns and rural addresses. The page for each of the 7 towns we list below sets out nearby places, guide prices and the questions people usually ask.
Towns listed in Renfrewshire and Inverclyde: Paisley, Greenock, Renfrew, Johnstone, Erskine, Port Glasgow, Gourock.
What to think about for touch-free and push-button activation in Renfrewshire and Inverclyde
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Car parks and drop-off points in Renfrewshire and Inverclyde benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Homes in Renfrewshire and Inverclyde often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
Touch-free and push-button activation in Renfrewshire and Inverclyde: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in Scotland
Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is touch-free and push-button activation for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Renfrewshire and Inverclyde.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us which doors need better controls at your building in Renfrewshire and Inverclyde, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Renfrewshire and Inverclyde: questions
How long does it take to fit activation devices in Renfrewshire and Inverclyde?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
How are prices worked out for touch-free and push-button activation in Renfrewshire and Inverclyde?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Renfrewshire and Inverclyde confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can wave switches in Renfrewshire and Inverclyde be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
Do touch-free switches work in cold or wet weather in Renfrewshire and Inverclyde?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
What happens to the old door when a new one is fitted in Renfrewshire and Inverclyde?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What does the free site survey in Renfrewshire and Inverclyde involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for touch-free and push-button activation, with drawings where the door type needs them.
Is a building warrant needed for a new automatic entrance in Renfrewshire and Inverclyde?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.