Covering Richmond and nearby
We cover the whole of the TW9 and TW10 postcode districts, along with nearby towns in Greater London. You book each visit for touch-free and push-button activation directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Getting a van close to the door is often the hardest part of a London job. Red routes, controlled parking zones and loading rules vary from street to street, so access and parking restrictions are planned into the visit to Richmond before it is booked.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Twickenham (1.8 miles), Hounslow (2.4 miles), Chiswick (3.0 miles), Kingston upon Thames (3.4 miles), Ealing (3.5 miles), Acton (3.5 miles).
What to think about for touch-free and push-button activation in Richmond
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Look at where people approach the door from. A switch that can only be reached once someone is already at the door, or in the leaf's path, is in the wrong place.
- Washrooms and accessible toilets in Richmond need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Homes in Richmond often need controls for more than one person. Carers, family and the person using the door may each need their own fob or button.
- Car parks and drop-off points in Richmond benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
Touch-free and push-button activation in Richmond: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Richmond.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Make the doors at your premises in Richmond easier and more hygienic to use. Start with a free survey of how each door is opened now.
Touch-free and push-button activation in Richmond: questions
Can you add touch-free switches to our automatic doors in Richmond?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
How are prices worked out for touch-free and push-button activation in Richmond?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Richmond confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you supply switches for several sites in Richmond?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Our door in Richmond keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
What should I send before the survey in Richmond?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for touch-free and push-button activation together more easily.
How do you make sure the door works for disabled visitors in Richmond?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Do businesses in Richmond have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.