Covering Richmond and nearby
We cover the whole of the TW9 and TW10 postcode districts, along with nearby towns in Greater London. You book each visit for automatic internal doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Space for materials and tools is limited at many addresses in Richmond, especially on narrow or pedestrianised streets in Greater London. Larger door sets are delivered for the time of fitting, and access and parking restrictions are planned into the visit.
Nearby towns we also list for automatic internal doors (straight-line distance): Twickenham (1.8 miles), Hounslow (2.4 miles), Chiswick (3.0 miles), Kingston upon Thames (3.4 miles), Ealing (3.5 miles), Acton (3.5 miles).
What to think about for automatic internal doors in Richmond
- Plan the work around the building's routine. Clinical areas, classrooms and kitchens in Richmond may need out-of-hours working, which should be agreed and priced up front.
- Each automated door needs power at the head. In older buildings in Richmond, running new supplies through finished corridors can be a significant part of the cost.
- Care homes in Richmond often have residents with dementia. Think about which doors should open freely and which should be controlled, and agree that as a care decision before choosing controls.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Offices in Richmond with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
Automatic internal doors in Richmond: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Richmond and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic internal doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Tell us which corridor, ward or office doors are causing problems in Richmond, and we will arrange a site visit and a written quote.
Automatic internal doors in Richmond: questions
How disruptive is the work in an occupied building in Richmond?
Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.
Can you give me a price for automatic internal doors in Richmond?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Richmond confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you service the internal doors in Richmond after fitting?
Yes. We can arrange planned servicing with each door's operator, sensors and fire alarm release checked and a written record left. Servicing is chargeable, and the price per visit is agreed in writing before an engineer attends. Visits can be grouped so several doors are done together.
Can you automate the corridor doors in our care home in Richmond?
Yes. We survey each door, including its fire rating, hinges, frame and power, and quote a fixed price. Doors can be set to open gently and slowly, with extra safety sensors where residents are frail. Work is planned around your care routines and agreed with the home manager.
What does the free site survey in Richmond involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic internal doors, with drawings where the door type needs them.
Can installation in Richmond happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Do businesses in Richmond have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.