Covering Poole and nearby
From shops and surgeries to schools, care homes and private houses, any building in the BH12, BH13, BH14, BH15, BH17 and BH18 postcode districts can be covered for touch-free and push-button activation. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Tall buildings can create strong wind at ground level, and wind pressure is a common cause of sliding doors stalling or reversing. Lobbies, telescopic leaves and correctly set closing force all help, and the engineer looks at exposure before recommending changes.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Bournemouth (4.6 miles), Ferndown (7.4 miles), Christchurch (9.0 miles), New Milton (14.2 miles), Weymouth (21.9 miles), Totton (25.8 miles).
What to think about for touch-free and push-button activation in Poole
- Think about who should open the door out of hours. A key switch or timer can change the mode at night without affecting how the door works by day.
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Washrooms and accessible toilets in Poole need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Shops on high streets in Poole may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
Touch-free and push-button activation in Poole: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Poole.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Ask for a fixed price on touch-free switches, push pads or fobs in Poole. The survey is free and nothing is fitted until you accept the quote.
Touch-free and push-button activation in Poole: questions
Can you move a push pad that is in the wrong place at our building in Poole?
Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.
Is there a guide price for touch-free and push-button activation in Poole?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Poole confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our door in Poole keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
Do touch-free switches work in cold or wet weather in Poole?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
Can automatic doors be fitted to a listed building in Poole?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Is there a warranty on touch-free and push-button activation?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Who is responsible for automatic doors on escape routes in Poole?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.