Covering Ferndown and nearby
Homes, businesses and public buildings throughout the BH22 postcode district can arrange touch-free and push-button activation with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Ferndown for the job rather than working from premises in town.
Small offices, community centres and village halls around Ferndown tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Bournemouth (6.1 miles), Christchurch (7.2 miles), Poole (7.4 miles), New Milton (10.8 miles), Salisbury (18.7 miles), Totton (19.4 miles).
What to think about for touch-free and push-button activation in Ferndown
- Listed buildings in Ferndown may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- Clinics and surgeries in Ferndown often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- Look at where people approach the door from. A switch that can only be reached once someone is already at the door, or in the leaf's path, is in the wrong place.
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
- Keep switch heights and symbols consistent across a site. People with sight loss or memory problems find doors easier when every switch is in the same place.
Touch-free and push-button activation in Ferndown: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Ferndown.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Ask for a fixed price on touch-free switches, push pads or fobs in Ferndown. The survey is free and nothing is fitted until you accept the quote.
Touch-free and push-button activation in Ferndown: questions
Our door in Ferndown keeps opening for passers-by. Can you fix it?
Usually, by adjusting or narrowing the sensor field, or by changing to a switch on that side. If the sensor is old or faulty, it may need replacing. A visit to adjust or replace a sensor is priced in writing before anyone attends, as that is care work.
What is the guide price for touch-free and push-button activation in Ferndown?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Ferndown confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you move a push pad that is in the wrong place at our building in Ferndown?
Yes. Moving a pad to a side wall or a post, away from the swinging leaf, often makes a big difference for wheelchair users. We set the new position at survey, quote the work, and test the door with the pad in its new place before we leave.
Can you add touch-free switches to our automatic doors in Ferndown?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
How do you make sure the door works for disabled visitors in Ferndown?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
How are payments structured for work in Ferndown?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Can a home in Ferndown get help paying for a door opener?
Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.