Covering Newry and nearby
If your building is in Newry, or anywhere in the BT35 postcode district, we can arrange touch-free and push-button activation. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Many buildings in Newry are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for touch-free and push-button activation (straight-line distance): Banbridge (12.1 miles), Portadown (17.4 miles), Armagh (17.8 miles), Craigavon (18.7 miles), Lurgan (19.9 miles), Lisburn (26.8 miles).
What to think about for touch-free and push-button activation in Newry
- Listed buildings in Newry may restrict new fixings on historic walls. Wireless switches mounted on posts or glazing can avoid cutting into original fabric, and are easy to move later.
- Shops on high streets in Newry may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Washrooms and accessible toilets in Newry need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Wireless devices need batteries changing from time to time. Choose wired switches for the busiest public doors, and wireless where wiring would be difficult or would spoil a finished wall.
- If the door is linked to access control, decide whether the switch should work all the time or only when the access control has released the door. That changes how it is wired.
Touch-free and push-button activation in Newry: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in Northern Ireland
In Northern Ireland, disability access duties come from the Disability Discrimination Act 1995, because the Equality Act 2010 does not apply there. Service providers and employers are expected to make reasonable adjustments, and an automatic door is a common one at entrances. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.
How it works
- Describe what you need. Whether the job is touch-free and push-button activation for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Newry.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us which doors need better controls at your building in Newry, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Newry: questions
Can wave switches in Newry be linked to our access control?
Yes. A wave switch can be set to work only after the access control system has released the lock, or to let people out freely from the inside while entry needs a card. We agree how it should behave and test it with your system at handover.
Can you give me a price for touch-free and push-button activation in Newry?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Newry confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you add touch-free switches to our automatic doors in Newry?
Usually, yes. Most operators have spare inputs for extra devices. We check the door, operator and wiring route at a free survey, then quote a fixed price for the switches and fitting. Wireless switches are an option where running cables would be difficult.
Can you supply switches for several sites in Newry?
Yes. We can survey several doors or buildings and quote each one separately, keeping switch types, heights and symbols the same across all your sites. That makes doors easier to find and use for visitors and staff. Larger orders can be phased site by site.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Newry is agreed before work starts.
What does the free site survey in Newry involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for touch-free and push-button activation, with drawings where the door type needs them.
Which marking should a new automatic door in Newry carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.