Coverage across Buckinghamshire
There is no branch to visit in Buckinghamshire; instead, specialist engineers working under our management travel to you. That keeps touch-free and push-button activation available across the whole area, including smaller towns and rural addresses. The page for each of the 9 towns we list below sets out nearby places, guide prices and the questions people usually ask.
Towns listed in Buckinghamshire: Milton Keynes, High Wycombe, Aylesbury, Bletchley, Amersham, Chesham, Gerrards Cross, Chalfont St Peter, Marlow.
What to think about for touch-free and push-button activation in Buckinghamshire
- Shops on high streets in Buckinghamshire may want the door to open for customers but not for people walking past outside. Narrowing the sensor field or adding a switch helps.
- Clinics and surgeries in Buckinghamshire often want touch-free switches on every door patients use. Sealed switch faces that stand up to cleaning products are worth specifying.
- Washrooms and accessible toilets in Buckinghamshire need the inside switch paired with a lock button and an emergency release, so the room can be used privately and safely.
- Car parks and drop-off points in Buckinghamshire benefit from a switch on a post, so drivers and passengers can open the door before they reach it.
- Doors next to busy walkways can open for every passer-by on a motion sensor. A wave switch or push pad on that side may cut false openings and heat loss.
Touch-free and push-button activation in Buckinghamshire: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT (£174 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT; homes £174 – £474 inc VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT; homes £234 – £594 inc VAT |
| Key switch or programme switch | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Replacement motion (activation) sensor | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Buckinghamshire and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on touch-free and push-button activation separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Tell us which doors need better controls at your building in Buckinghamshire, and we will arrange a free survey and a fixed quote for each device.
Touch-free and push-button activation in Buckinghamshire: questions
Do touch-free switches work in cold or wet weather in Buckinghamshire?
Switches for outdoor use are sealed against rain and rated for outdoor temperatures. In exposed spots, a hood or a sheltered position helps. If a switch is outside, we specify one made for that rather than an indoor model, and check it is easy to see and reach in poor light.
What will touch-free and push-button activation in Buckinghamshire cost?
Our guide starts from £145 excluding VAT (per switch fitted), the same guide price we use across the UK. For homes that is from £174 including VAT. The free site survey in Buckinghamshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long does it take to fit activation devices in Buckinghamshire?
Lead time is typically 1 to 3 weeks for the devices. On site, a single switch usually takes an hour or two, and a full set for several doors may take a day. We give the expected time on site with the quote.
Do you fit door controls for homes in Buckinghamshire?
Yes. We fit wall buttons, fobs, wristbands and wheelchair-mounted switches for home door openers in Buckinghamshire. For homes, prices are quoted including VAT and the survey costs nothing. Fobs can be added or removed later if carers change or one is lost.
What happens once the installation in Buckinghamshire is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
How do you make sure the door works for disabled visitors in Buckinghamshire?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Which building regulations apply to a new automatic entrance in Buckinghamshire?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.