Covering Bridgwater and nearby
Addresses anywhere in the TA6 postcode district can book telescopic sliding doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Bridgwater, so the price, the booking and the paperwork all come from one place.
Small offices, community centres and village halls around Bridgwater tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Burnham-on-Sea (7.6 miles), Taunton (8.9 miles), Weston-super-Mare (15.1 miles), Yeovil (20.7 miles), Clevedon (22.6 miles), Nailsea (23.5 miles).
What to think about for telescopic sliding doors in Bridgwater
- A telescopic header is deeper than a standard one. In older buildings in Bridgwater with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
- Entrances used by ambulances and patient transport in Bridgwater benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
- Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- Hospital and supermarket entrances in Bridgwater that run for long hours put more wear on the extra rollers and belts of a telescopic door. Plan a servicing arrangement from the start rather than waiting for the first fault.
Telescopic sliding doors in Bridgwater: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is telescopic sliding doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Bridgwater.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Short of side space but need a wide entrance in Bridgwater? Get in touch and we will show you the clear opening a telescopic door can give.
Telescopic sliding doors in Bridgwater: questions
Can you fit telescopic sliding doors in Bridgwater?
Yes. We arrange supply and installation in Bridgwater and the rest of Somerset. Specialist automatic door engineers working under our management carry out the survey and the fitting, and we stay the contracting party throughout, so one company is responsible for the drawing, the quote, the installation and the handover paperwork.
What do you charge for telescopic sliding doors in Bridgwater?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Bridgwater confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the telescopic door survey in Bridgwater really free?
Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.
Can our existing sliding door in Bridgwater be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What happens once the installation in Bridgwater is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do I need permission from a landlord or the council before work in Bridgwater?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Do businesses in Bridgwater have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.