UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Telescopic sliding doors · Somerset

Telescopic sliding doors in Nailsea

The door is made to order, typically 4 to 8 weeks from order, and fitting a telescopic entrance in Nailsea usually takes one or two days on site. The survey is free, and the quote lists every item, from leaves and sensors to making good the opening.

Town
Nailsea
Area
Somerset
Postcodes
BS48
Guide price
From £6,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Nailsea and nearby

Homes, businesses and public buildings throughout the BS48 postcode district can arrange telescopic sliding doors with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Nailsea for the job rather than working from premises in town.

GP surgeries, dental practices and pharmacies in Nailsea often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for telescopic sliding doors (straight-line distance): Portishead (3.5 miles), Clevedon (4.3 miles), Clifton (6.3 miles), Bedminster (6.7 miles), Bristol (7.1 miles), Caldicot (10.7 miles).

What to think about for telescopic sliding doors in Nailsea

  • Entrances across Somerset that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
  • Medical centres in Nailsea often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
  • A telescopic header is deeper than a standard one. In older buildings in Nailsea with low ceilings or decorative fanlights, the survey checks whether the header can sit above the opening or needs to be recessed.
  • Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
  • If the entrance is on an escape route, ask your fire risk assessor what the door must do before ordering. Break-out telescopic leaves have to be chosen at the start, because they cannot be added afterwards.

Telescopic sliding doors in Nailsea: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.

ItemGuide priceNotes
Telescopic single-slide, two leaves£6,995 – £9,995installed, ex VAT
Telescopic bi-parting, four leaves£8,995 – £13,995installed, ex VAT
Very wide or full-height openingsPriced on surveymeasured and designed at the survey
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Describe what you need. Whether the job is telescopic sliding doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Nailsea.
  2. Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
  3. Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
  4. Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.

Ready to widen the way in at your building in Nailsea? Arrange a free survey and receive a fixed written quote with no obligation attached.

Telescopic sliding doors in Nailsea: questions

Can you look after the door in Nailsea once it is installed?

Yes. We can quote planned servicing for the new door, with each visit priced in writing beforehand and the interval set by how heavily the door is used and the manufacturer's instructions. Busy entrances such as hospitals and supermarkets are usually serviced more often than quieter offices.

What do you charge for telescopic sliding doors in Nailsea?

Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Nailsea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How much wider will our entrance in Nailsea be with telescopic doors?

As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Nailsea shows the exact clear width before you commit.

Can our existing sliding door in Nailsea be converted to telescopic?

Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.

Will the building stay secure while the entrance is being changed?

We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Nailsea is agreed before work starts.

What is the lead time for telescopic sliding doors in Nailsea?

Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.

Who is responsible for automatic doors on escape routes in Nailsea?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Telescopic sliding doors in Nailsea

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.