Covering Bath and nearby
From shops and surgeries to schools, care homes and private houses, any building in the BA1 and BA2 postcode districts can be covered for telescopic sliding doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Care homes and supported living schemes are spread across Bath and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Keynsham (6.4 miles), Trowbridge (7.7 miles), Kingswood (8.3 miles), Melksham (9.6 miles), Fishponds (10.1 miles), Frome (10.3 miles).
What to think about for telescopic sliding doors in Bath
- Care homes and supported living buildings in Bath may want the main door to open freely for visitors but stay locked for some residents. A keypad or fob reader on the inside can be wired to the operator.
- Entrances across Somerset that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
- Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
- Measure the widest thing that has to pass through, whether that is a hospital bed, a mobility scooter or a cage of stock. The clear opening of a telescopic door is chosen from that figure, not from the size of the old doorway.
- Hospital and supermarket entrances in Bath that run for long hours put more wear on the extra rollers and belts of a telescopic door. Plan a servicing arrangement from the start rather than waiting for the first fault.
Telescopic sliding doors in Bath: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bath.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Short of side space but need a wide entrance in Bath? Get in touch and we will show you the clear opening a telescopic door can give.
Telescopic sliding doors in Bath: questions
What paperwork do we get after installation in Bath?
You receive the commissioning and test record, a site-specific risk assessment, user instructions and the conformity paperwork for the door. Keep them with your building records. They are the starting point for later servicing and safety inspections, and they show how the door was set up with reference to BS EN 16005.
What is the guide price for telescopic sliding doors in Bath?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Bath confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will a telescopic door in Bath work with our fire alarm?
It can. The operator can take a signal from the fire alarm panel so the door opens and stays open, or does whatever the fire strategy for the building requires. The panel connection is usually made by your alarm engineer, and the quote shows who is responsible for each part of the work.
Can our existing sliding door in Bath be converted to telescopic?
Not usually by modifying the old door, because the header, tracks and leaves are different. It is normally replaced as a complete set within the same opening. The survey checks whether the existing structure and floor can take the new door, and the quote shows removal of the old one as a separate line.
What power supply is needed for telescopic sliding doors in Bath?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What happens once the installation in Bath is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Bath?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.