Covering Risca and nearby
We cover the whole of the NP11 postcode district, along with nearby towns in Gwent. You book each visit for telescopic sliding doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Older shopfronts are common in market towns, and some in Risca may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for telescopic sliding doors (straight-line distance): Newport (4.6 miles), Cwmbran (4.6 miles), Caerphilly (5.5 miles), Blackwood (6.2 miles), Pontypool (6.9 miles), Bargoed (7.7 miles).
What to think about for telescopic sliding doors in Risca
- Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
- Entrances across Gwent that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
- Entrances used by ambulances and patient transport in Risca benefit from a full-opening button for crews, while everyday visitors use a narrower partial opening that keeps the waiting area warmer.
- Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.
- Floor guides on two sets of leaves need a level, firm floor. Cracked screed, rocking tiles or a sloping threshold should be put right before fitting, and the quote will say who does it.
Telescopic sliding doors in Risca: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Telescopic single-slide, two leaves | £6,995 – £9,995 | installed, ex VAT |
| Telescopic bi-parting, four leaves | £8,995 – £13,995 | installed, ex VAT |
| Very wide or full-height openings | Priced on survey | measured and designed at the survey |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for telescopic sliding doors in Risca, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
For beds, trolleys or wheelchairs that need more room at your entrance in Risca, send us the details and we will plan a wider doorway.
Telescopic sliding doors in Risca: questions
Can you look after the door in Risca once it is installed?
Yes. We can quote planned servicing for the new door, with each visit priced in writing beforehand and the interval set by how heavily the door is used and the manufacturer's instructions. Busy entrances such as hospitals and supermarkets are usually serviced more often than quieter offices.
How much should I budget for telescopic sliding doors in Risca?
Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Risca confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the telescopic door survey in Risca really free?
Yes, for a new telescopic entrance the site survey costs nothing and carries no obligation. The engineer measures the opening, checks the structure, floor and power, and talks through layouts. You then receive a measured drawing and a fixed, itemised written quote, and you decide whether to go ahead.
How much wider will our entrance in Risca be with telescopic doors?
As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in Risca shows the exact clear width before you commit.
What happens once the installation in Risca is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What power supply is needed for telescopic sliding doors in Risca?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Risca?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.