UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic sliding doors · Gwent

Automatic sliding doors in Risca

We arrange supply and installation of automatic sliding doors in Risca and elsewhere in Wales. Each job starts with a free survey and a measured drawing, and ends with the door tested, documented and explained to the staff who will run it every day.

Town
Risca
Area
Gwent
Postcodes
NP11
Guide price
Typically £4,495 to £12,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Risca and nearby

If your building is in Risca, or anywhere in the NP11 postcode district, we can arrange automatic sliding doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

In Risca, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.

Nearby towns we also list for automatic sliding doors (straight-line distance): Newport (4.6 miles), Cwmbran (4.6 miles), Caerphilly (5.5 miles), Blackwood (6.2 miles), Pontypool (6.9 miles), Bargoed (7.7 miles).

What to think about for automatic sliding doors in Risca

  • Older shopfronts in Risca often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
  • Business park offices around Risca often have a reception door that is busy for an hour each morning and quiet for the rest of the day. A timer on the programme switch can lock it out of hours without anyone remembering to.
  • Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across Gwent, a partial opening mode or a draught lobby is worth considering.
  • Care settings in Risca sometimes need a sliding entrance that visitors can use freely while some residents cannot leave unaccompanied. Keypads and programme modes can be set to follow the home's own care policies.
  • Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.

Automatic sliding doors in Risca: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.

ItemGuide priceNotes
Single-slide door set, about 1.0 to 1.2 m clear opening£4,495 – £7,995framed aluminium and glass, installed, ex VAT
Bi-parting door set, about 2 m clear opening, with side screens£6,995 – £12,995installed, ex VAT
Large, full-height or heavy-duty entrancesfrom £14,995Priced on survey
Break-out leaves and screens for an escape route£995 – £3,995added to a sliding door, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT
Battery backup for power-cut operation£395 – £695per door, ex VAT

Standards and rules in Wales

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Risca.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Ready to replace a heavy door in Risca? Tell us the width, the type of building and how busy it gets, and we will take it from there.

Automatic sliding doors in Risca: questions

Do you install automatic sliding doors in Risca?

Yes. We arrange supply and installation throughout Gwent, with the work carried out by specialist automatic door engineers working under our management who travel to the site for the survey and the fitting. You deal with one contracting party from quote to handover, and the same arrangement can cover servicing afterwards if you want it.

What price range should I expect for automatic sliding doors in Risca?

Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Risca confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What happens after the sliding door in Risca is fitted?

You get a handover pack with the test record, risk assessment and user instructions, and staff are shown the programme switch. From then on the door needs daily checks and planned servicing. We can quote a service arrangement at intervals based on how much the door is used and the risk.

Do we need consent for a new entrance in Risca?

It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.

Will the building stay secure while the entrance is being changed?

We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Risca is agreed before work starts.

Is there a warranty on automatic sliding doors?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

Who is responsible for automatic doors on escape routes in Risca?

The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.

Next step

Automatic sliding doors in Risca

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.