UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Break-out escape route doors · Greater Manchester

Break-out escape route doors in Atherton

We quote break-out sliding doors for new entrances and replacements in Atherton and elsewhere in England. The survey checks the swing zone, floor, power and fire alarm interface, and the fixed quote sets out the door, safety devices, lead time and warranty terms.

Town
Atherton
Area
Greater Manchester
Postcodes
M46
Guide price
From £7,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Atherton and nearby

If your building is in Atherton, or anywhere in the M46 postcode district, we can arrange break-out escape route doors. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Many buildings in Atherton are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.

Nearby towns we also list for break-out escape route doors (straight-line distance): Tyldesley (1.3 miles), Westhoughton (2.2 miles), Leigh (2.2 miles), Hindley (3.7 miles), Walkden (3.9 miles), Farnworth (4.2 miles).

What to think about for break-out escape route doors in Atherton

  • A break-out door needs a dedicated fused spur and, where the strategy relies on it opening without mains power, a battery unit. If there is no supply near the head of the door, an electrician will need to run one.
  • Think about night security alongside escape. A lock that stops a leaf breaking out while people are still inside causes problems, so choose one that releases on the fire alarm where the strategy calls for it.
  • Shopping centre units in Atherton usually need landlord approval for a new entrance and for any fire alarm connection. Ask centre management for their fit-out rules early, as they often set working hours and contractor requirements.
  • If a canopy, ramp or steps sit close to the door, measure how far a broken-out leaf will travel. A leaf that clips a handrail or step edge will not give the escape width the strategy assumes.
  • Supermarkets and large stores in Atherton see trolleys, pallets and cleaning machines through the entrance. Those knocks can stiffen or loosen break-out fittings, so set service intervals with that traffic in mind.

Break-out escape route doors in Atherton: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.

ItemGuide priceNotes
Break-out sliding door set for an escape routefrom £7,995installed, ex VAT; typically up to £16,995
Converting an existing sliding door to break-outPriced on surveydepends on the frame, leaves and operator
Battery backup for power-cut operation£395 – £695per door, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT

Standards and rules in England

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for break-out escape route doors in Atherton, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Tell us about the building in Atherton, its footfall and its fire alarm, and we will plan a break-out door around them, starting with a free site visit.

Break-out escape route doors in Atherton: questions

We have an old sliding door in Atherton. Do we have to replace all of it?

Not always. If the frame and operator can take break-out leaves and parts are still available, a conversion may be possible. If the door is older or its parts are unsupported, replacing the whole entrance is usually more reliable. The survey looks at both and the quote explains the difference.

How are prices worked out for break-out escape route doors in Atherton?

Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Atherton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you work with our fire risk assessor in Atherton?

Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.

Is a break-out door suitable for an exposed entrance in Atherton?

Usually, yes. Wind pressure on the leaves is one of the things the survey checks, along with which way the entrance faces and how sheltered it is. The break-out fittings and operator settings are chosen so the leaves hold in line in normal weather but still open by hand in an emergency.

How much disruption should we expect while the work is done in Atherton?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

What does the written quote for break-out escape route doors in Atherton include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Do businesses in Atherton have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Break-out escape route doors in Atherton

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.