UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Telescopic sliding doors · Derbyshire

Telescopic sliding doors in New Mills

When a shop unit or reception in New Mills has its opening close to a corner, a column or a neighbouring window, ordinary sliding leaves often have nowhere to park. Telescopic leaves need far less wall, and our free survey shows exactly how much doorway you gain.

Town
New Mills
Area
Derbyshire
Postcodes
SK22
Guide price
From £6,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering New Mills and nearby

Engineers working under our management travel to addresses across the SK22 postcode district for telescopic sliding doors. There is no depot or showroom in New Mills; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Parking on a busy high street can be tight. When work is booked in New Mills, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.

Nearby towns we also list for telescopic sliding doors (straight-line distance): Hazel Grove (5.0 miles), Glossop (5.7 miles), Bredbury (6.0 miles), Hyde (6.7 miles), Bramhall (6.8 miles), Stockport (7.2 miles).

What to think about for telescopic sliding doors in New Mills

  • Medical centres in New Mills often share a frontage with a pharmacy or other units. Check who owns the shopfront and whether the landlord needs to approve a new entrance before the survey drawing is finalised.
  • Grit and leaves blown into the threshold collect in floor guide channels. Entrances facing a car park or open ground benefit from a matwell or canopy, which also keeps rain off the sensors.
  • Measure the widest thing that has to pass through, whether that is a hospital bed, a mobility scooter or a cage of stock. The clear opening of a telescopic door is chosen from that figure, not from the size of the old doorway.
  • Entrances across Derbyshire that face the prevailing wind can suffer from leaves dragging or sensors reacting to blown debris. A canopy, a draught lobby or careful sensor set-up deals with most of these problems.
  • Power for the operator usually comes from a fused spur at the head of the door. Where the nearest supply is some distance away, plan for an electrician to run a new circuit before the fitting day.

Telescopic sliding doors in New Mills: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £6,995 ex VAT.

ItemGuide priceNotes
Telescopic single-slide, two leaves£6,995 – £9,995installed, ex VAT
Telescopic bi-parting, four leaves£8,995 – £13,995installed, ex VAT
Very wide or full-height openingsPriced on surveymeasured and designed at the survey
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in New Mills.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

For beds, trolleys or wheelchairs that need more room at your entrance in New Mills, send us the details and we will plan a wider doorway.

Telescopic sliding doors in New Mills: questions

Do we need to close our building in New Mills while the door is fitted?

Usually not for long. Most telescopic entrances take one to two days on site, and the opening can be secured overnight. Where the entrance is the only way in, we plan the work around your hours, use another entrance if there is one, or work early or at weekends, with any extra cost shown in the quote.

Is there a guide price for telescopic sliding doors in New Mills?

Our guide starts from £6,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in New Mills confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will a telescopic door in New Mills work with our fire alarm?

It can. The operator can take a signal from the fire alarm panel so the door opens and stays open, or does whatever the fire strategy for the building requires. The panel connection is usually made by your alarm engineer, and the quote shows who is responsible for each part of the work.

How much wider will our entrance in New Mills be with telescopic doors?

As a rough guide, a telescopic door gives about two-thirds of its overall width as clear opening, against about half for a standard sliding door. On a typical shop or surgery entrance that can mean an extra 300 to 600 mm. The survey drawing for your building in New Mills shows the exact clear width before you commit.

Can installation in New Mills happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

What should I send before the survey in New Mills?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for telescopic sliding doors together more easily.

Which building regulations apply to a new automatic entrance in New Mills?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Telescopic sliding doors in New Mills

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.