Covering Chippenham and nearby
Engineers working under our management travel to addresses across the SN15 postcode district for sensor upgrades and replacement. There is no depot or showroom in Chippenham; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Parking on a busy high street can be tight. When work is booked in Chippenham, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Calne (5.3 miles), Melksham (6.1 miles), Trowbridge (10.4 miles), Bath (11.8 miles), Yate (13.8 miles), Swindon (16.3 miles).
What to think about for sensor upgrades and replacement in Chippenham
- After a near miss at a door in Chippenham, keep a note of what happened and where the person was standing. It helps the engineer judge which zone the sensor failed to cover.
- Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
- Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
- Sensor changes on escape route doors must never stop the door opening when it needs to. The engineer checks the door's escape mode after any sensor work.
Sensor upgrades and replacement in Chippenham: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Share the details. Send the address in Chippenham, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
- Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
- Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
- Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.
Upgrade the sensors on an older automatic door in Chippenham. Tell us the door type and what it is doing, and we will price the work in writing.
Sensor upgrades and replacement in Chippenham: questions
Will you record the sensor settings for our building in Chippenham?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
What will sensor upgrades and replacement in Chippenham cost?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Chippenham, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do you replace automatic door sensors in Chippenham?
Yes. Sensor replacement and upgrades in Chippenham are booked and managed by us and carried out by engineers who specialise in automatic doors. They work on sensors for sliding, swing, folding and revolving doors from most makers. The visit cost is set in writing before they attend, and each new sensor is tested before they leave.
Can you price new sensors for my door in Chippenham from photos?
Often, yes. Photos of the sensor, the door from both sides and the label on the operator cover usually tell us which sensor is needed and whether it suits the controller. We can then quote the sensor and fitting in advance, with the visit price confirmed before anyone travels.
Do you offer service contracts in Chippenham?
Yes. A service contract sets out how many visits a year each door receives, what each visit includes and the price, all agreed in writing before you sign. Contracts suit sites with several doors or busy entrances, because visits are planned ahead and the records stay in one place. Contract length and notice terms are shown in the agreement.
How is the visit price set for work in Chippenham?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
Do businesses in Chippenham have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.