Covering Chippenham and nearby
From shops and surgeries to schools, care homes and private houses, any building in the SN15 postcode district can be covered for safety and compliance upgrades. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Doors at quieter sites in Chippenham and elsewhere in Wiltshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Calne (5.3 miles), Melksham (6.1 miles), Trowbridge (10.4 miles), Bath (11.8 miles), Yate (13.8 miles), Swindon (16.3 miles).
What to think about for safety and compliance upgrades in Chippenham
- Older shopfronts in Chippenham often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- If your building in Chippenham has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
Safety and compliance upgrades in Chippenham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Describe what you need. Whether the job is safety and compliance upgrades for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Chippenham.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Close off the actions on your automatic door risk assessment in Chippenham. Ask for a fixed, itemised quote for the upgrades it recommends.
Safety and compliance upgrades in Chippenham: questions
Do you carry out automatic door safety upgrades in Chippenham?
Yes. We quote and manage upgrade work in Chippenham, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
Can you give me a price for safety and compliance upgrades in Chippenham?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Chippenham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long do upgrades take at premises in Chippenham?
Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.
Is it cheaper to upgrade or replace our old door in Chippenham?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
What happens to the old door when a new one is fitted in Chippenham?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Can automatic doors be fitted to a listed building in Chippenham?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Chippenham?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.