UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Sensor upgrades and replacement · West Yorkshire

Sensor upgrades and replacement in Leeds

Has a risk assessment in Leeds recommended new safety sensors? We can quote for exactly the items it lists, fit them and record the settings and test results, so the report's actions can be signed off.

Town
Leeds
Area
West Yorkshire
Postcodes
LS1, LS2, LS3, LS4, LS6, LS13
Guide price
Typically £195 to £495 ex VAT
  • Visit price agreed in writing first
  • Parts quoted before fitting
  • Written record of every visit
  • Most makes of automatic door
  • England, Wales, Scotland and NI

Covering Leeds and nearby

Sites across the LS1, LS2, LS3, LS4, LS6 and LS13 postcode districts are visited by specialist automatic door engineers working under our management. They travel to Leeds for sensor upgrades and replacement as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.

Universities, colleges and city hotels see sharp peaks of traffic at changeover times and check-in hours. For entrances like these in Leeds, opening width, hold-open time and sensor range are set so the door copes with crowds without wasting heat.

Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Rothwell (4.4 miles), Morley (4.4 miles), Pudsey (4.6 miles), Horsforth (4.9 miles), Batley (7.4 miles), Yeadon (7.4 miles).

What to think about for sensor upgrades and replacement in Leeds

  • Entrances facing busy roads in Leeds can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
  • Doors with side screens may need a light curtain on the leaf edge or post to protect the gap. This is one of the most common upgrades on older sliding doors.
  • Shopping parades and older shopfronts in Leeds sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
  • Rain, snow and blowing leaves can trigger radar sensors over exposed doors. Some sensors filter weather better than others, which the engineer weighs up when choosing a replacement.
  • Shiny, wet or newly polished floors can confuse infrared safety sensors. Mention any recent floor changes at your building in Leeds so the zones can be set for the new surface.

Sensor upgrades and replacement in Leeds: guide prices

The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.

ItemGuide priceNotes
Add or replace a safety or activation sensor£195 – £495per sensor fitted, ex VAT
Touch-free switch or push pad£145 – £395per switch, ex VAT
Side-screen or light-curtain protectionfrom £295per door, ex VAT; on survey

Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.

BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.

How it works

  1. Tell us what is happening. Describe the fault, or the service or inspection that is due, and send photos of the door and any label on the operator. Include the address in Leeds and how much the site depends on the door.
  2. Visit price agreed in writing. We confirm the price of the visit in writing before an engineer attends. If the door can be priced from photos and its make and model, we say so at this stage.
  3. Engineer visit. A specialist engineer working under our management diagnoses the fault or carries out the service, then tests the operation of the door and its safety sensors before leaving the site.
  4. Findings and follow-up. You receive a written record of what was found and done. Any parts or further work needed are quoted in writing before they go ahead, and nothing is added without your agreement.

Upgrade the sensors on an older automatic door in Leeds. Tell us the door type and what it is doing, and we will price the work in writing.

Sensor upgrades and replacement in Leeds: questions

Can you upgrade sensors on an old door in Leeds?

Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.

Is there a guide price for sensor upgrades and replacement in Leeds?

Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Leeds, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.

Will new sensors stop false openings at our entrance in Leeds?

Usually. Modern sensors can ignore cross traffic and detect only people moving towards the door, and the zone can be narrowed. If the entrance faces a busy street or catches heavy weather, the engineer may suggest a sensor that filters those conditions better.

Can a risk assessment in Leeds tell us which sensors we need?

Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.

Can you price a repair in Leeds from photos?

Sometimes. Clear photos of the door, the operator cover and any label showing the make and model, plus a description of what the door is doing, can let us price a likely repair before a visit. Where the cause is not obvious, we agree a diagnostic visit price in writing first and quote the repair afterwards.

Can visits in Leeds be arranged outside working hours?

Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.

Do businesses in Leeds have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Sensor upgrades and replacement in Leeds

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.