Covering Stoke-on-Trent and nearby
Our coverage of Stoke-on-Trent takes in the ST1, ST2, ST3, ST4 and ST6 postcode districts and the neighbouring parts of Staffordshire. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about sensor upgrades and replacement and we will confirm the arrangements and the price in writing.
Universities, colleges and city hotels see sharp peaks of traffic at changeover times and check-in hours. For entrances like these in Stoke-on-Trent, opening width, hold-open time and sensor range are set so the door copes with crowds without wasting heat.
Nearby towns we also list for sensor upgrades and replacement (straight-line distance): Newcastle-under-Lyme (2.0 miles), Kidsgrove (6.1 miles), Biddulph (7.8 miles), Leek (9.7 miles), Congleton (11.0 miles), Sandbach (12.2 miles).
What to think about for sensor upgrades and replacement in Stoke-on-Trent
- Care settings in Stoke-on-Trent often need longer hold-open times and wider safety zones for residents who move slowly, use walking frames or pause in the doorway.
- Shopping parades and older shopfronts in Stoke-on-Trent sometimes have low transoms or canopies that limit where a sensor can be mounted. The engineer checks height and angle first.
- Corridor doors that people walk past rather than through may work better on a touch-free switch than a motion sensor, cutting needless openings and heat loss.
- Entrances facing busy roads in Stoke-on-Trent can see false openings from passing vehicles and cyclists. A sensor with direction detection and a tighter zone usually helps.
- If several doors at one site have the same old sensor, replacing them together keeps the doors behaving consistently and may reduce the cost per sensor.
Sensor upgrades and replacement in Stoke-on-Trent: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: typically £195 to £495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Touch-free switch or push pad | £145 – £395 | per switch, ex VAT |
| Side-screen or light-curtain protection | from £295 | per door, ex VAT; on survey |
Sensor prices cover the part, fitting and set-up. If a sensor is fitted on a visit of its own, the visit charge (from £95 ex VAT) is added, and we confirm the total in writing before an engineer attends. Each sensor is set up for the door and tested before the engineer leaves.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for sensor upgrades and replacement can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
For doors that open for passers-by or close too soon in Stoke-on-Trent, talk to us about new sensors and detection zones set for your entrance.
Sensor upgrades and replacement in Stoke-on-Trent: questions
Can you upgrade sensors on an old door in Stoke-on-Trent?
Most older doors can take modern sensors. A few very old controllers cannot monitor current safety sensors. If yours is one of them, we explain whether a controller upgrade or a new drive unit is the better option, and quote it, before any work is done.
What is the guide price for sensor upgrades and replacement in Stoke-on-Trent?
Our guide is £195 to £495 excluding VAT (per sensor fitted), the same guide prices we use across the UK. We agree the visit price in writing before an engineer attends in Stoke-on-Trent, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Will you record the sensor settings for our building in Stoke-on-Trent?
Yes. The job report lists each sensor fitted, its position, the settings used and the test results. Keep it with your service records, as it helps future engineers and shows the door's safety set-up was checked after the work. The same details are useful if an insurer or inspector asks.
Can a risk assessment in Stoke-on-Trent tell us which sensors we need?
Yes. A safety inspection tests each hazard zone and records where sensor coverage is missing or poor. The report then lists the sensors or light curtains needed, and we can quote those items exactly as listed, or you can pass the report to another competent installer.
Can you price a repair in Stoke-on-Trent from photos?
Sometimes. Clear photos of the door, the operator cover and any label showing the make and model, plus a description of what the door is doing, can let us price a likely repair before a visit. Where the cause is not obvious, we agree a diagnostic visit price in writing first and quote the repair afterwards.
What happens during a visit in Stoke-on-Trent?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
Who is responsible for automatic doors on escape routes in Stoke-on-Trent?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.